ICIS price assessments for polyethylene (PE) are widely used by market players globally in contracts and trade deals. Our reports provide you spot and contract prices for key PE grades, as well as feedstock prices and trends drawn from our global network of trusted sources.
ICIS offers short-to-long term solutions – from historical and forecast pricing data, news and market analysis, to supply and demand forecasts, ensuring you can evaluate the markets from every angle.
Updated to Q2 2019
Polyethylene (PE) supply in Q2 was ample. Some imported grades were not as available as many sources had expected, but nevertheless there was enough availability of all grades. Lengthy supply had no impact on pricing as crude and naphtha were strong, although spot prices began to erode as upstream naphtha fell. By the end of the quarter, new imported quantities – particularly from the US – were being offered for July delivery.
Demand for contracted volumes was sustained in Q2, but spot demand began to slip as it became clear than upstream prices were falling and June distribution and spot demand had been very low. This was put down to the poorer economies in Europe, expectations of lower prices to come and general caution caused by geopolitical concerns. Smaller buyers tended to cut back on volumes more than larger ones.
US polyethylene (PE) supply held mostly steady during the second quarter at elevated levels following the significant rise in capacity seen during 2017. Sasol raised operating rates at its new 470,000 tonne/year LLDPE plant, while other anticipated new plants are likely to come online in the second half of the year. Inventory levels came down from their first quarter highs, but remained well above last year’s figures.
Domestic PE demand was healthy, boosted by higher demand for plastic packaging from online retailers. Overseas demand grew at a slower rate than expected, although US sellers achieved significant increases in their export volumes by taking advantage of the region’s low-cost position relative to other regions. Trade tensions with China blunted export demand into the Chinese market, but sellers were able to push additional volumes to other markets such as Europe, southeast Asia and Latin America.
Q2 supply in China was stable as the new Jiutai Energy plant ran at a relatively low operating rate in May. China import volumes fell as it became a less lucrative market due to lower prices. Regional southeast Asian supply was healthier as ethylene prices weakened substantially in the later part of Q2, making it more economical for PE producers to ramp up production. Import supply from the Middle East, India and US remained healthy.
Q2 demand across Asia was largely subdued amid escalating US-China trade tension. Most converters kept their inventories lean and reduced their monthly purchase volume whenever possible on the back of slow consumption for finished goods. Depreciation of major Asian currencies against the US dollar caused imports to be less attractive against local resin prices, which curbed import demand further. Demand pick up in major southeast Asian markets was limited ahead of Eid-ul Fitr holiday in June.
Polyethylene availability fluctuated in the second quarter. Middle East production issues limited low density polyethylene volumes at the beginning of Q2. The ramping up of trade tariffs between the US and Chins eased supply concerns. Volume origin diversified as sellers were forced to find new markets for their material. Weak pricing across Africa meant that other regions offered better netbacks but supply levels were so high that players did not struggle to obtain their requirements.
Demand prior to Ramadan and Eid al-Fitr was healthy. As players stocked up for the following slow period, when Middle East producers cut production and availability falls. During May, as Ramadan began, demand dropped off and is yet to recover. This is traditionally a slow season, as the rainy season begins in sub- Saharan countries but this was exacerbated by the collapse of Chinese PE prices. African buyers held out for similar in their region.
Production problems in the Middle East limited availability in Turkey. High density polyethylene (HDPE) production was particularly disturbed by flooding in Iran, which is a major provider of HDPE. Low density polyethylene supply then also struggled later in the quarter due to production outages in the Middle East. The faltering value of the Turkish lira against the dollar, the re-running of the Istanbul mayoral election and Ramadan and Eid al-Fitr restricted demand, easing supply pressure.
It has been difficult for the Turkish PE market to gain any momentum prior to summer, due to frequent disturbances. Moderate buying interest was curtailed early in the quarter by the municipal election and just prior to that, a slide in the value of the lira against the dollar. The collapse of Asian prices saw little demand there dissipated as buyers held off for lower prices.
Middle Eastern PE supply emerged tight in early Q2 following scheduled maintenance activities at one producer facility, with supply levels improving later following a build-up of inventories post-maintenance. Although US-origin PE did not make an appearance within the GCC, supply levels stayed ample through May and June due to US cargoes emerging in other markets, displacing Middle Eastern product. The market of Jordan saw US product offered at competitive levels to the Red Sea ports.
Middle Eastern demand emerged stable early in the quarter but tapered off from May onwards with the onset of Ramadan, a traditionally slow period for most polymer purchases. Downstream demand also shrunk, with shorter working hours at regional PE processing units. Demand stayed weak in H1 June owing to the Eid ul-Fitr holiday. Significant uncertainty in the wake of US-China trade war that contributed to a lack of clear market direction additionally capped uptake through June.
Polyethylene supply declined in Q2 because but only because of ethylene problems in Mexico that resulted in diminished Pemex production. The Asahi plant has been idled as Pemex opted for concentrating HDPE production on the Mitsui plant. Other plants in Mexico have run units intermittently because of ethylene shortages. The Venezuelan PE plants worked at very low operating rates in Q2, estimated at less than 25%.PE production has been normal in most other countries of Latin America.
During Q2, demand dropped in several countries because a strong dollar has brought currency depreciations in several countries of Latin America. Argentina has been the most affected country in Latin America, and Brazil has shown the same symptoms, although on a smaller scale. The currency decline also affected Chile and Colombia, although the impact in those countries was moderate. Q2 demand has been softer than expected in Mexico, and prices have declined because of oversupply.
ICIS publishes pricing reports for key polyethylene grades and offers timely and in-depth market data, including price assessments, trade activity, feedstock supply and analysis of each region’s current and upcoming export availability.
Subscription to the ICIS polyethylene pricing reports includes complimentary access to our petrochemical analytics platform providing you with a 360-degree view of the market.
Key trading prices and activities – Import, export, domestic prices. Offers, bids, transactions
Price alerts and market updates: Shifts in prices, latest news on the PE market developments and changes to regulations and demand trends
Plant data: Production and capacity, plant maintenance and shutdowns
Feedstock: Prices and market updates for feedstocks – crude, ethane and ethylene
Historical prices: Download and/or chart pricing from as far back as the start of ICIS coverage
Weekly market outlook: Overview and outlook for the overall PE market, including a brief commentary on the other regional markets
Supply and demand: Analysis of domestic and international supply and demand
Regional coverage: Africa, Asia-Pacific, China, CIS, Europe, Latin America, Middle East/South Asia, Turkey, US
Middle East/South Asia:
Plan your market position with ICIS 12-month rolling price forecast. Understand where the market is heading to shape your short-term pricing and negotiation strategies.
Our concise monthly reports include details of prices, margins, capacity, supply and demand for the next 12 months. The reports are quick to read and support fast decision-making.
ICIS brings you breaking chemical news as it happens – including market moves, analysis, data and more. The service is reliable, authoritative and always available when you need it most.
Stay on top of polyethylene and other related commodities such as its feedstocks across all regions with ICIS news.
Gain a long-term view of the market with ICIS Supply and Demand data (1978-2040), which offers end-to-end perspectives of the polyethylene supply chain – HDPE, LDPE, LLDPE, ethylene and crude.
Gain quick access to data on import and export volumes, plant capacities, production, product trade flows, companies and route. With historical data from 1978 and forecast available up to 2040, this powerful data and analytics service from ICIS helps senior management, strategists, business planners, analysts and risk managers to:
Working closely with you to understand your strategies, challenges and ambitions, the ICIS consulting team delivers tailored advice and solutions to suit your unique requirements. With many years’ experience of guiding business leadership teams, we show you how market conditions can make a positive or negative impact on your long-term plans.
Training: ICIS polymer training provides market players an overview of the plastics market value chain, including polyethylene. Our team of industry experts can help you increase your knowledge of the industry and gain the insight and know-how needed to operate and trade effectively.
Conferences: ICIS hosts regional Polyolefins conferences, bringing key industry experts to deliver a programme that addresses current industry issues.
Our Pricing Methodology: ICIS price assessments are based on information gathered from a wide cross-section of the market, comprising consumers, producers, traders and distributors from more than 250 reporters worldwide. Confirmed deals, verified by both buyer and seller, provide the foundation of our price assessments.
Our benchmark prices have been trusted by buyers and sellers around the globe for nearly 40 years.
Choose ICIS for concise information and easy-to-assess formatting, all delivered straight to your inbox.
SINGAPORE (ICIS)--Demand for acrylonitrile butadiene styrene (ABS) in China is expected to stay depressed following recent escalation in the country’s protracted trade war with the US. Household...Read
NEW YORK (ICIS)--Kuwait-based MEGlobal’s 750,000 tonne/year ethylene glycol (EG) project in Oyster Creek, Texas, US is on track for mechanical completion by early September 2019, an official told...Read
HOUSTON (ICIS)--Motiva Enterprises has agreed to buy Flint Hills Resources's chemical plants in Port Arthur, Texas. No purchase price was disclosed. Motiva said it is expected to close in the...Read
With insights into the economic situation, trade war, future investments and much more, the 7th ICIS US Butadiene and Derivatives Conference will be bringing you the necessary data and analysis to ensure you have all the important information to make those essential business decisions
Join us the 11 December 2019 // New York, USA and make sure you do not miss out on this essential event for the butadiene value chain.