Metallocene linear low density polyethylene Prices, markets & analysis
ICIS coverage of the European metallocene market provides you with weekly domestic price assessments, insight into Europe’s supply and demand situation and analysis of metallocene vs non-metallocene LLDPE.
Use ICIS information to:
- Anticipate price and market movements
- Back up your negotiations
- Determine settlement and contract terms
Metallocene Linear Low Density Polyethylene Europe Transcript
ICIS launched the European metallocene linear low density polyethylene report in 2012 because of its penetration into the polyethylene market.
It is being increasingly used compared to traditional linears because of it’s unique properties. Downgauging, that is using less polyethyelene to manufacture a film with the same properties as thicker film, thereby cutting the use of plastics globally, is the reason why metallocene linear is here to stay. It’s growth is assured in coming years as sustainability is key.
As at present metallocene linear is in its early stages and buyers often switch between linear grades simply because one grade might be cheaper than another.
Metallocene linear pricing is heavily dependent on what happens in the wider linear markets. So at ICIS, we decided to include information about the major linear grades as well as metallocene linear to give subscribers a full picture of the market.
The report is weekly and follows movements in Europe with reference to the all-important Asia market. Upstream information such as ethylene, crude oil and naphtha is also included to keep clients up to date with the latest developments.
Metallocene linear low density polyethylene news and market information products from ICIS
We offer the following regional Metallocene linear low density polyethylene coverage to keep you informed of factors and developments affecting prices in the Europe Metallocene linear low density polyethylene marketplace.
Price Reporting – More information about the price reports we publish on Metallocene linear low density polyethylene
Independent price assessments and market coverage
Price History – More information about the historical price data we publish on Gas
Track historical price data
News & analysis
News & Analysis - News & market analysis specifically relating to Metallocene linear low density polyethylene
Breaking news of latest developments affecting the markets.
Insight and analysis of factors driving prices.
The European low density polyethylene (LDPE) market has undergone a radical change in the past three months. Demand has fallen sharply and commodity grades are now in oversupply.
Coating grades remain relatively firm. The minimum commodity LDPE spot price at the end of August was at €1,150/tonne ($1,541/tonne) FD (free delivered) NWE (northwest Europe), but by mid-November it stood at €1,040/tonne FD NWE.
The main reason for concern in the LDPE market moving towards the end of 2011 is the level of demand, which some sources estimate to have dropped by more than 10%.
Production has been cut at cracker and polymer level. One LDPE producer is running production at 50% of capacity throughout November and December, while another reports its cracker output to be running at technical minimum at all sites during the same period.
LDPE spot activity is dominated by producers which have sold parcels to large buyers, bypassing contractual agreements. Exports have helped support the weak European market.
Demand for linear low density polyethylene (LLDPE) in Europe has slumped, with little possibility of exporting material to Asia, where demand has softened.
LLDPE from new production in the Middle East initially led to price erosion in the C4 butene-added LLDPE sector, but the slump in demand has led to producers fighting for market share on all grades. The line between the grades has become confused.
Metallocene LLDPE (MLLDPE) producers have decreased pricing at large accounts to levels barely above €1,200/tonne FD NWE in some cases, while LLDPE C4 is now at €1,020–1,040/tonne FD NWE from its end-August level of €1,140–1,160/tonne FD NWE.
C8 LLDPE sellers also pitched into the fray, offering product at MLLDPE levels, leaving C6 LLDPE sellers with product to spare, and offering it at C4 LLDPE prices at large accounts. Imported volumes of MLLDPE are offered at €1,180/tonne DDP (delivered duty paid) in Europe. Production is now being cut back heavily in a move to control the oversupply.
High density polyethylene (HDPE) non-film segments have been relatively stable over the past three months, and have only recently seen price erosion, following the November ethylene contract settlement at a €20/tonne reduction.
Imports have been stable in the blow-moulding sector and food packaging demand is holding up well for small bottles. HDPE injection offers have increased in November, with some imports available, and prices have slipped a little.
HDPE film, however, has seen significant price erosion as sellers with new Middle Eastern capacity have forged a place for themselves in the market by reducing prices.
Demand has been slow, however. Prices have dropped by around €80/tonne, or 7%. Production in Europe is now being cut back to accommodate weak demand. One major producer reports its cracker output to be running at 67%, its technical minimum.
Polyethylene is split into LDPE, HDPE and LLDPE.
What the report covers:
- - Domestic and spot price quotes for metallocene C6 and non-metallocene C6 and C8 LLDPE prices
- - A comparison of metallocene trade dynamics with non-metallocene C4, C6 and C8 LLDPE
- - Supply and demand data
- - Production capacities and news in Europe
- - Feedstock price movements in northwest Europe, Asia and the Middle East
The ICIS Europe Metallocene LLDPE weeklyreport covers domestic contract and spot movements in the C6 blow film MLLDPE market, using information from key industry players including producers, buyers, traders and distributors.
The report focuses on C6 blow film MLLDPE grades and gives information on C6 cast stretch film and C8 MLLDPE grades, with analysis on C6 and C8 linear low density polyethylene (LLDPE) markets.
Production capacities and feedstock prices are also covered in the report, together with other essential information relating to both upstream and downstream movements, providing a holistic view of the market.
ICIS collects pricing data on a wide range of chemical, energy and fertilizer products, including Metallocene linear low density polyethylene. Our extensive experience in price reporting means we can offer you access to historical data dating back more than 20 years for certain commodities.
Our time series of pricing data enables you to build and model trends, to get a view of where markets might be heading. The data service includes charting functionality, allowing you to chart and download multiple data series for manipulation in your own internal models. You can also export data to Excel via the ICIS dashboard service.
ICIS price assessments are based on information gathered from a wide cross-section of the market, comprising consumers, producers, traders and distributors from more than 250 reporters world-wide. Confirmed deals, verified by both buyer and seller, provide the foundation of our price assessments.
Our in-depth market knowledge drives our specialist focus, as we recognise the importance of individual market dynamics and not a one-size-fits-all approach.
Over 25 years of reporting on key chemicals markets, including Metallocene linear low density polyethylene, has brought global recognition of our methodology as being unbiased, authoritative and rigorous in preserving our editorial integrity. Our global network of reporters in Houston, London, Singapore, Shanghai, Guangzhou, Mumbai, Perth and Moscow ensures unrivalled coverage of established and emerging markets.