Ethylene glycol

HOUSTON (ICIS)–Following a better-than-expected 2024 first quarter, US compounder and formulator Avient raised its full-year guidance for adjusted earnings before interest, tax, depreciation and amortization (EBITDA) by $5 million at the low end. Sales into the defense market, along with raw material deflation, were the key earnings drivers in Q1 and Avent expects both to support earnings through 2024, CEO Ashish Khandpur and CFO Jamie Beggs told analysts during the company’s Q1 earnings call on Tuesday. New 2024 guidance Previous 2024 guidance Pro forma 2023 adjusted EBITDA $505 to $535 million $510 to $535 million $501.8 million SALES IMPROVING IN MOST END MARKETSAvient sees demand conditions “generally improving across all regions”, with improved momentum in consumer, packaging, healthcare, defense and industrial end markets, the executives said. After a 35% year-on-year increase in Q1, defense sales amid the ongoing geopolitical tensions, Avient expects those sales to continue growing through 2024, albeit not at the first quarter’s hot pace, they said. Avient’s Dyneema-brand fiber technology is used in the personal protection of soldiers and law enforcement and border control officers. While Avient’s utilization rates in defense are high, the company is able to meet forecast demand growth and expects no capacity limitations this year. However, it may add capacities in the future, depending on demand, which can be “lumpy” in that market, they said. Defense accounted for 7% of Avient’s total 2023 sales of $3.14 billion, with more than half of those sales in the US. Avient acquired the Dyneema business from DSM in 2022. Telecommunications and energy, however, are among the weaker end markets, with first-quarter sales down double-digit and weakness continuing into the second quarter. Destocking in the capital-intensive telecommunications market continued in Q1, with no meaningful rebound in that market expected until 2025, the executives said. Telecommunications accounted for 4% of Avient’s 2023 sales. BY REGION Regionally, Avient sees good momentum in the US in markets such as consumer packaging, defense, building and construction, industrial and infrastructure. “Destocking in those markets is over”, Khandpur said. With the exception of telecommunications and energy, overall demand in North America is “coming back quite well”, he said. However, persistent inflation is delaying the timing of interest rate cuts, which could weigh on sales in end markets such as building and construction, transportation and industrial, the executives said. In China, about 70% of Avient’s sales go into the local market, putting the company into a good position as that country’s economic policies transition to focus on the domestic market, the executives said. In Europe, demand in packaging and healthcare is improving, but Avient expects the region’s overall year-on-year sales growth to be soft. Consumer confidence in Europe is weak and eurozone manufacturing continues to signal contraction, they noted. Meanwhile, the stronger US dollar has become a headwind, they added. Sales by region in 2023: RAW MATERIAL DEFLATION Raw material deflation will continue to support margin expansion in the second quarter, albeit to a lesser extent than in the first quarter, the executives said. In the first quarter, Avient saw better-than-expected pricing for non hydrocarbon-based raw materials such as pigments and certain performance additives. Primary raw materials used in Avient’s manufacturing operations include polyolefin and other thermoplastic resins, titanium oxide (TiO2), inorganic and organic pigments, specialty additives and ethylene. Pricing, net of raw materials, should help drive year-on-year earnings growth in 2024, the executives said. Also, the company expects additional margin expansion due synergies and plant closures related to its acquisition of Clariant’s masterbatch business back in 2020, Beggs noted. M&A NOT A PRIORITY In the near-term, Avient will focus on organic growth and margin expansion whereas growth through mergers and acquisitions (M&A) is not a priority. While Avient is not ruling out M&A, any deals would be “small and bolt-on in nature”, in areas like healthcare, sustainable solutions or composites, with focus on Asia and Latin America, Khandpur said. “Premiums are pretty high” in M&A, he added. Thumbnail photo of Ashish Khandpur, who took over as Avient's CEO and president on 1 December 2023; photo source: Avient

07-May-2024

ORLANDO (ICIS)–SABIC is looking for further opportunities for growth in the Americas as part of its strategy to navigate an era of excess capacity around the world, one that has led it and other producers to shutter capacity in high-cost regions, an executive said. "We are actively looking at our growth opportunities throughout North America as well as South America," said Sami Al-Osaimi, executive vice president, polymers, SABIC. He made his comments during a presentation at this year’s NPE: The Plastics Show. Al-Osaimi said the Americas is a very key strategic market for SABIC. The company has seen good momentum in North America. "We are definitely going to really make sure that we leverage what exactly our customers require," he said. About two years ago, SABIC and ExxonMobil started operations at an integrated polyethylene (PE) and ethylene glycols (EG) complex in Corpus Christi, Texas, US, under the Gulf Coast Growth Ventures (GCGV) joint venture. The startup marks SABIC's first US-based ethylene and PE production, albeit through a joint venture. At the same time, Al-Osaimi acknowledged the challenges facing the industry. The market is contending with the consequences of a surge in new ethylene capacity that has started up in recent years. ICIS estimates that up to 20 million tonnes/year may need to shut down to keep operating rates at healthy levels. High-cost regions are bearing the brunt. Earlier in April, SABIC announced plans to shut down a cracker in Geleen, the Netherlands. ExxonMobil revealed plans to shut down its cracker in France during that same week. Al-Osaimi did not rule out further capacity rationalizations during a question-and-answer session that followed his presentation at NPE. "SABIC always is looking to its operations in Americas, globally, and how to become more efficient and effective to support our customers to really develop the right solutions," he said. "This is going to be an ongoing process." OPPORTUNITIES IN CHEM RECYCLING, E-CRACKINGSABIC is further improving chemical recycling technology to make it more effective and efficient, he said. SABIC and Plastic Energy are developing a chemical recycling plant under a joint venture in Geleen. Completion had been expected in the fourth quarter of 2023. There are still challenges with scaling up the technology, Al-Osaimi said. Still, SABIC is open to expansion, with possible sites including the US, Saudi Arabia and other regions. In addition, SABIC, BASF and Linde recently started up a demonstration unit of an electric cracker (e-cracker). As the group demonstrates the technology, it would explore expanding the site and potentially building new units, Al-Osaimi said. STRATEGY OF COLLABORATION, INNOVATIONIn prepared remarks, Al-Osaimi elaborated on how SABIC was navigating the challenges in the market by stressing its focus on innovation and collaboration with customers. The company is focusing on end markets such as advanced packaging, automotive, transportation, building and construction, consumer goods, electrical components and health and hygiene, he said. Electric vehicles (EVs) have material challenges, that present opportunities for SABIC. The company is developing polymers to prevent thermal runaway – part of its larger BLUEHERO initiative, Al-Osaimi said. Companies that build automobiles powered by internal combustion engines (ICEs) still want to lower their weight to improve their fuel efficiency and reduce their greenhouse gas emissions, he said. That is creating demand for lighter weigh materials. Produced by Plastics Industry Association (PLASTICS), NPE: The Plastics Show takes place 6-10 May in Orlando, Florida. Focus article by Al Greenwood Thumbnail image shows polyethylene (PE), which is used in plastics bags. (Photo by Elaine Thompson/AP/Shutterstock)

07-May-2024

SINGAPORE (ICIS)–Saudi Aramco's net income fell by 14.4% year on year to Saudi riyal (SR) 102.3 billion in the first quarter amid lower crude oil volumes and weakening downstream margins, the energy giant said on Tuesday. in SR billions Q1 2024 Q1 2023 % Change Sales 402.04 417.46 -3.7 Operational Profit 202.05 222.18 -9.1 Net profit 102.27 119.54 -14.4 Early this year, Saudi Arabia’s government ordered Aramco to halt its oil expansion plan and to target a maximum sustained production capacity of 12m barrels/day, 1m barrels/day below the target announced in 2020. In the first quarter, Aramco's downstream income before interest, income taxes and zakat (annual Islamic tax) slumped by 64% year on year to SR4.62 billion. The drop in downstream earnings reflects weakening refining and chemicals margins, partially offset by inventory valuation movement, it said. The drop in group earnings was partially offset by lower production royalties, an increase in crude oil prices compared to the same period last year and lower income taxes and zakat. Despite having a capacity of 12 million barrels/day, Saudi Arabia currently produces about 9 million barrels/day as part of production cuts initiated by OPEC and its allies in October 2022 and further voluntary cuts by Saudi Arabia and other OPEC+ members in April 2023, all designed to stabilize oil prices. Following an OPEC+ meeting in June 2023, Saudi Arabia – the world's top crude exporter – announced a further oil production cut of 1 million barrels/day. “Looking ahead, I expect our portfolio to continue to evolve as we aim to contribute to an energy transition that offers solutions to climate challenges, but at the same time recognizes the need for affordable, reliable, and flexible energy supplies," added Amin Nasser, Aramco's President and CEO. Aramco's chemicals arm SABIC and China's Fujian Energy and Petrochemical Group Co held a groundbreaking ceremony to mark the start of construction at the SABIC Fujian Petrochemical Complex in China's Fujian province during the first quarter. The project will include a mixed-feed steam cracker with up to 1.8m tonne/year ethylene (C2) capacity and various downstream units producing ethylene glycols (EG), polyethylene (PE), polypropylene (PP) and polycarbonate (PC), among other products. Thumbnail photo : One of Aramco's US offices (Source: Saudi Aramco)

07-May-2024

HOUSTON (ICIS)–Global average rates for shipping containers rose for the first time since January, workers at freight rail carriers Canadian National (CN) and Canadian Pacific Kansas City (CPKC) have voted in favor of a strike, and the US regulator that oversees railroads finalized a rule allowing reciprocal switching, highlighting this week’s logistics roundup. CONTAINER RATES Shipping container rates have been rising steadily since December when attacks by Houthi rebels on commercial vessels in the Red Sea forced carriers to take the longer route around the tip of the African continent before leveling off last week. This week, the global average for 40-foot shipping containers rose by 1%, according to supply chain advisors Drewry and as shown in the following chart. Rates from Shanghai to the US East Coast edged slightly higher, but rates from China to the West Coast edged slightly lower, as shown in the following chart. Judah Levine, head of research at online freight shipping marketplace and platform provider Freightos, said that the overall container market has settled into a new routine that avoids the Red Sea. “Though significant backlogs, congestion and equipment shortages seen during the first few weeks of the crisis have dissipated, adjustments have resulted in some moderate but ongoing disruptions,” Levine said in a weekly update. He said that even after falling drastically since the beginning of the year, prices remain well above normal and are likely to increase relative to this new floor as demand is set to increase for peak season. Container ships and costs for shipping containers are relevant to the chemical industry because while most chemicals are liquids and are shipped in tankers, container ships transport polymers, such as polyethylene (PE) and polypropylene (PP), are shipped in pellets. They also transport liquid chemicals in isotanks. LIQUID CHEMICAL TANKERS US liquid chemical tanker freight rates assessed by ICIS were unchanged this week. From the US Gulf (USG) to Asia, the market has been quieter this week as a holiday-shortened week has sidelined some key players. There have been only a few parcels quoted, which is placing downward pressure on freight rates for smaller lots. Larger base cargoes of monoethylene glycol (MEG), methyl tertiary butyl ether (MTBE), and methanol have been popular chemicals on this route, keeping larger freight rates steady. From the USG to India, the market has been very quiet. PORT OF BALTIMORE Since the opening of a fourth channel into the Port of Baltimore, 171 commercial vessels have transited the waterway, including five of the vessels that were trapped inside the port after the containership Dali struck the Key Bridge, causing it to collapse, according to the Unified Command (UC). The MSC Passion III entered the port on 29 April, according to vesselfinder.com, making it the first container ship to enter the port since the accident. The closing of the port did not have a significant impact on the chemicals industry as chemicals make up only about 4% of total tonnage that moves through the port, according to data from the American Chemistry Council (ACC). The ACC said less than 1% of all chemicals involved in waterborne commerce, both domestic and trade volumes, pass through Baltimore. But a market participant in Ohio told ICIS previously that it is seeing delays in delivery times for imports as vessels originally destined to offload in Baltimore are getting re-routed to other ports. PANAMA CANAL Wait times for non-booked vessels ready for transit edged for higher both directions this week, according to the Panama Canal Authority (PCA) vessel tracker and as shown in the following image. Wait times a week ago were 2.5 days for northbound traffic and 5.6 for southbound traffic. The PCA will increase the number of slots available for Panamax vessels to transit the waterway beginning 16 May and will add another slot for Neopanamax vessels on 1 June based on the present and projected water levels in Gatun Lake. RAILROADS Workers at freight rail carriers Canadian National (CN) and Canadian Pacific Kansas City (CPKC) have voted in favor of a strike. A first work stoppage could occur as early as 22 May, if no new collective agreements are reached by then, officials at labor union Teamsters Canada Rail Conference (TCRC) said in a televised announcement on 1 May. The rail carriers warned that a work stoppage would disrupt supply chains throughout North America and constrain trade between Canada and the US and Mexico. The two railroads account for the bulk of freight rail traffic in Canada. Meanwhile, chemical industry participants were largely supportive of a final rule adopted by the Surface Transportation Board (STB) on reciprocal switching for inadequate service by railroads, but think the scope was too narrow and it does not cover a significant portion of rail traffic. For the first time, the STB said it is requiring that three service metrics be maintained on a standardized basis across all Class 1 railroads. In the US, chemical railcar loadings represent about 20% of chemical transportation by tonnage, with trucks, barges and pipelines carrying the rest. In Canada, chemical producers rely on rail to ship more than 70% of their products, with some exclusively using rail. Rail is also the predominant shipping method for US ethanol. Additional reporting by Kevin Callahan and Stefan Baumgarten Please see the Logistics: Impact on chemicals and energy topic page

03-May-2024

SINGAPORE (ICIS)–SABIC's net income fell by 62% year on year to Saudi Riyal (SR) 250 million in the first quarter amid a drop in prices and sales volumes, the chemicals major said late on Wednesday. Losses from discontinued operations continue to weigh on results Overcapacity persists, pressuring the industry as market growth lags – CEO Spending range of $4 billion to $5 billion expected for 2024 in Saudi riyal (SR) billions Q1 2024 Q1 2023 % Change Sales 32.69 36.43 -10 Operational profit 1.21 1.76 -31 Net income 0.25 0.66 -62 "The decrease in net profit is attributed to lower revenues, lower results from associates and joint ventures in addition to losses from discontinued operations," SABIC said in a filing on the Saudi bourse, Tadawul. SABIC swung to a net loss of Saudi riyal (SR) 2.77bn ($739m) in 2023, largely due to one-off losses related to a divestment. Q1 revenue fell following a 3% decline in average selling prices and a 7% reduction in sales quantities. "Global economic uncertainty remained high during the first quarter of 2024, caused by geopolitical and logistical issues. Adding to these challenges were high global inflation levels and strict lending policies," SABIC CEO Abdulrahman Al-Fageeh said in a separate statement. Al-Fageeh in an investor call cautioned that overcapacity remains a challenge for the industry, creating a gap between supply and demand that is likely to persist throughout 2024. While positive demand signals emerged in Q1 2024, "the year outlook remains uncertain as the world still navigates through geopolitical situations with high inflation", he said. SABIC plans to adopt a disciplined approach to capital expenditure, projecting a spending range of $4 billion to $5 billion for the year, compared with $3.5 billion to 3.8 billion last year. NEW PROJECTS SABIC has started construction of its $6.4bn manufacturing complex in China’s southern Fujian province. The project "would add a qualitative range of products to SABIC’s portfolio of chemicals and polymers and enhance the company's presence in the Chinese market", the company said. The project will include a mixed-feed steam cracker with up to 1.8m tonne/year ethylene (C2) capacity and various downstream units producing ethylene glycols (EG), polyethylene (PE), polypropylene (PP) and polycarbonate (PC), among other products. SABIC also inaugurated the world’s first large-scale electrically heated steam olefins cracking furnace in Netherlands, which will pave the way for the company to fulfill its commitment to reach carbon neutrality by 2050. SABIC is 70%-owned by energy giant Saudi Aramco. ($1 = SR3.75) Thumbnail photo by SABIC Focus article by Nurluqman Suratman

02-May-2024

SAO PAULO (ICIS)–Brazilian chemicals producers are lobbying hard for an increase in import tariffs for key polymers and petrochemicals from 12.6% to 20%, and higher in cases, hoping the hike could slow down the influx of cheap imports, which have put them against the wall. For some products, Brazil’s chemicals trade group Abiquim, which represents producers, has made official requests for the import tariffs to go up to a hefty 35%, from 9% in some cases. On Tuesday, Abiquim said several of its member companies “are already talking about hibernating plants” due to unprofitable economics. It did so after it published another set of somber statistics for the first quarter, when imports continued entering Brazil em masse. Brazil’s government Chamber of Foreign Commerce (Camex) is concluding on Tuesday a public consultation about this, with its decision expected in coming weeks. Abiquim has been busy with the public consultation: it has made as many as 66 proposals for import tariffs to be hiked for several petrochemicals and fertilizers, including widely used polymers such polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), or expandable PS (EPS), to mention just a few. Other chemicals trade groups, as well as companies, have also filed requests for import tariffs to be increased. In total, 110 import tariffs. HARD TO FIGHT OFFBrazil has always depended on imports to cover its internal chemicals demand, but the extraordinary low prices coming from competitors abroad has made Brazil’s chemicals plant to run with operating rates of 65% or lower. More and more, the country’s chemicals facilities are becoming white elephants which are far from their potential, as customers find in imported product more competitive pricing. Considering this dire situation and taking into account that the current government in Brasilia led by Luiz Inacio Lula da Silva may be more receptive to their demands, Abiquim has put a good fight in publica and private for measure which could shore up chemical producers’ competitiveness. This could come after the government already hiked import tariffs on several products in 2023 and re-introduced a tax break, called REIQ, for some chemicals which had been withdrawn by the previous Administration. While Brazil’s chemicals production competitiveness is mostly affected by higher input costs, with natural gas costs on average five times higher than in the US, the industry is hopeful a helping hand from the government in the form of higher import tariffs could slow down the flow of imports into Brazil. As a ‘price taker region’ given its dependence on imports, Latin American domestic producers have taken a hit in the past two years. In Brazil, polymers major Braskem is Abiquim’s commanding voice. Abiquim, obviously, has always been very outspoken – even apocalyptic – about the fate of its members as they try to compete with overseas countries, namely China who has been sending abroad product at below cost of production. The priorities in China’s dictatorial system are not related to the balance of markets, but to keep employment levels stable so its citizens find fewer excuses to protest against the regime which keeps them oppressed. Capitalist market dynamics are for the rest of the world to balance; in China’s dictatorial, controlled-economy regime the priority is to make people feel the regime’s legitimacy can come from never-ending economic growth. The results of such a policy for the rest of the world – not just in chemicals but in all industrial goods – is becoming clear: unprofitable industries which cannot really compete with heavily subsidized Chinese players. The results of such a policy in China are yet to be seen, but subsiding at all costs any industry which creates employment may have debt-related lasting consequences: as they mantra goes, “there is no such thing as a free lunch.” Abiquim’s executive president urged Lula’s cabinet to look north, to the US, where the government has imposed hefty tariffs on almost all China-produced industrial goods or raw materials for manufacturing production. “[The hikes in import tariffs] have improved the US’ scenario: despite the aggressive advance in exports by Asian countries, the drop in US [chemicals] production in 2023 was of 1%, while in Brazil the index for production fell nearly by 10%,” said Andre Passos. “The country adopted an increase in import taxes of over 30% to defend its market from unfair competition. The taxation for some inputs, such as phenol, resins and adipic [acid], for example, exceeds three digits. “Here, we are suggesting an increase in rates to 20% in most claims … We need to have this breathing space for the industry to recover,” he concluded. As such, the figures for the first quarter showed no sign of imports into Brazil slowing down. The country posted a trade deficit $9.9 billion during the January-March period; the 12-month accumulated (April 2023 to March 2024) deficit stood at $44.7 billion. A record high of 61.2 million tonnes of chemicals products entered Brazil in Q1; in turn, the country’s industry exported 14.6 million tonnes. Abiquim proposals for higher import tariffs Product Current import tariff Proposed tariff Expandable polystyrene, unfilled, in primary form 12.6% 20% Other polystyrenes in primary forms 12.6% 20% Carboxymethylcellulose with content > =75%, in primary forms 12.6% 20% Other polyurethanes in liquids and pastes 12.6% 20% Phthalic anhydride 10.8% 20%  Sodium hydrogen carbonate (bicarbonate) 9% 35% Copolymers of ethylene and alpha-olefin, with a density of less than 0.94 12.6% 20% Other orthophthalic acid esters 11% 20% Other styrene polymers, in primary forms 12.6% 20% Other silicon dioxides 0% 18% Other polyesters in liquids and pastes  12.6% 20% Commercial ammonium carbonates and other ammonium carbonates 9% 18% Other unsaturated polyethers, in primary forms 12.6% 20% Polyethylene terephthalate, with a viscosity index of 78 ml/g or more 12.6% 20% Phosphoric acid with an iron content of less than 750 ppm 9% 18% Dinonyl or didecyl orthophthalates 11% 20% Poly(vinyl chloride), not mixed with other substances, obtained by suspension process 12.6% 20% Poly(vinyl chloride), not mixed with other substances, obtained by emulsion process 12.6% 20% Methyl polymethacrylate, in primary form  12.6% 20% White mineral oils (vaseline or paraffin oils) 4% 35% Other polyetherpolyols, in primary forms 12.6% 20% Other unfilled epoxy resins in primary forms 12.6% 20% Silicon dioxide obtained by chemical precipitation 9% 18% Acrylonitrile-butadiene rubber in plates, sheets, etc 11% 35% Other organic anionic surface agents, whether or not put up for retail sale, not classified under previous codes 12.6% 23% Phenol (hydroxybenzene) and its salts 7% 20% Fumaric acid, its salts and esters 10 ,8% 20% Plasticizers and plastics 10 ,8% 20% Maleic anhydride 10 ,8% 20% Adipic acid salts and esters 10 ,8% 20% Propylene copolymers, in primary forms 12.6% 20% Adipic acid 9% 20% Unfilled polypropylene, in primary form 12.6% 20% Filled polypropylene, in primary form 12.6% 20% Methacrylic acid methyl esters 10 ,8% 20% Other ethylene polymers, in primary forms 12.6% 20% Acrylic acid 2-ethylhexyl esters 0% 20% 2-Ethylexanoic acid (2-ethylexoic acid) 10. 8% 20% Other copolymers of ethylene and vinyl acetate, in primary forms 12.6% 20% Other unfilled polyethylenes, density >= 0.94, in primary forms 12.6% 20% Polyethylene with a density of less than 0.94, unfilled 12.6% 20% Other saturated acyclic monoalcohol acetates, c atom <= 8 10. 8% 20% Polyethylene with a density of less than 0.94, with filler 12.6% 20% Triacetin 10. 8% 20% Sodium methylate in methanol 12.6% 20% Stearic alcohol (industrial fatty alcohol) 12.6% 20% N-butyl acetate                              11% 20% Stearic acid (industrial monocarboxylic fatty acid) 5% 35% Alkylbenzene mixtures 11% 20% Organic, non-ionic surface agents 12.6% 23% Ammonium nitrate, whether or not in aqueous solution 0.0% 15% Monoethanolamine and its salts 12.6% 20% Isobutyl alcohol (2-methyl-1-propanol) 10.8% 20% Butan-1-ol (n-butyl alcohol) 10.8% 20% Styrene-butadiene rubber (SBR), food grade as established by the Food Chemical Codex, in primary forms 10.8% 22% Styrene                                9% 18% Hexamethylenediamine and its salts 10.8% 20% Latex from other synthetic or artificial rubbers 10.8% 35% Propylene glycol (propane-1, 2-diol) 10.8% 20% Preparations 12.6% 20% Linear alkylbenzene sulfonic acids and their salts 12.6% 23% 4,4'-Isopropylidenediphenol (bisphenol A, diphenylolpropane) and its salts 10.8% 20% Dipropylene glycol 12.6% 20% Butanone (methyl ethyl ketone) 10.8% 20% Ethyl acetate                                 10.8% 20% Methyl-, ethyl- and propylcellulose, hydroxylated 0.0% 20% Front page picture: Chemical production facilities outside Sao Paulo  Source: Union of Chemical and Petrochemical industries in the state of Sao Paulo (Sinproquim) Focus article by Jonathan Lopez Additional information by Thais Matsuda and Bruno Menini

30-Apr-2024

SINGAPORE (ICIS)–Saudi Aramco continues its quest for downstream petrochemical investments in the world’s second-biggest economy, adding Hengli Petrochemical in a list of target companies in which the global energy giant intends to acquire a strategic stake. The acquisitions in China are in line with Aramco’s Vision 2030 of expanding its downstream business. Aramco is currently in discussion to acquire a 10% stake in Hengli Petrochemical as the companies signed a memorandum of understanding (MOU) on 22 April covering supply of crude and raw material, product sales and technology licensing. Hengli Petrochemical owns and operates a refinery and petrochemical complex at Liaoning province with 400,000 bbl/day of refining and 1.5 million tonnes/year ethylene capacities. The Chinese producer also operates several chemical plants in Jiangsu and Guangdong provinces. The deal "aligns with Aramco’s strategy to expand its downstream presence in key high-value markets, advance its liquids-to-chemicals program, and secure long-term crude oil supply agreements", Aramco said in a statement on 22 April. Since 2022, Aramco has embarked on major investments in China, which involved taking strategic stakes in companies with major petrochemical projects under way. Chinese companies Planned investments Date of announcement Remarks Hengli Petrochemical 10% stake 22 Apr 2024 Rongsheng Petrochemical Cross acquisition talks – Rongsheng to acquire 50% stake in Saudi Aramco Jubail Refinery Co (SASREF); Aramco to take a maximum 50% stake in Rongsheng’s Ningbo Zhongjin Petrochemical 2 Jan 2024 To jointly develop Zhongjin’s upgrading/expansion and a new advanced materials project in Zhoushan Shandong Yulong Petrochemical 10% stake 11 Oct 2023 Shandong Energy is currently building a refining and petrochemical complex in Yantai called Shandong Yulong Petrochemical – a joint venture project with Chinese conglomerate Nanshan Group Shenghong Petrochemical 10% stake 27 Sept 2023 Rongsheng Petrochemical 10% stake 27 Mar 2023 Deal completed in Jul ’23 Huajin Aramco Petrochemical Co (HAPCO) a $12 billion joint venture, Aramco holds 30% 11 Mar 2022, final investment decision made Project broke ground in Mar ’23; to come on stream in 2026 Aramco CEO Amin Nasser in late March indicated that the company intends to continue making further investments in China’s chemicals sector with local partners, noting that the country has a "vitally important" place in the company’s global investment strategy. The energy giant aims to increase its liquids-to-chemicals throughput to 4 million barrels per day by 2030, which will require a wider footprint in China, the world’s biggest chemical market, analysts said. The investments will fuel further growth in the Chinese economy, they added. Focus article by Fanny Zhang Thumbnail image: The Guoyuan Port Container Terminal in Chongqing, China, on 29 February 2024. (Costfoto/NurPhoto/Shutterstock)

23-Apr-2024

SINGAPORE (ICIS)–Aramco and China’s Hengli Group have entered into discussions regarding the potential acquisition of a 10% stake in Hengli Petrochemical, the Chinese company said on Tuesday. Based on the memorandum of understanding (MoU) signed on 22 April, the partners will also cooperate on crude and raw material supply, product sales as well as technology licensing, it said. The deal "aligns with Aramco’s strategy to expand its downstream presence in key high-value markets, advance its liquids-to-chemicals program, and secure long-term crude oil supply agreements", Aramco said in a separate statement. Hengli Petrochemical owns and operates a refinery and petrochemical complex at Liaoning province with 400,000 bbl/day of refining and 1.5 million tonnes/year ethylene capacities. The company also owns several chemical plants in Jiangsu and Guangdong provinces.

23-Apr-2024

HOUSTON (ICIS)–Costs for shipping containers from Asia to South America are soaring while rates are plummeting along the other major trade lanes and Maersk will resume transits through the Panama Canal after administrators said they expect to be back to normal in 2025, highlighting this week’s logistics roundup. ASIA-SOUTH AMERICA CONTAINER RATES Rates for shipping containers from Asia to the US and Europe continue to fall, but rates from Asia to South America are spiking, according to data from ocean and freight rate analytics firm Xeneta and as shown below. Market participants said space along the Asia-South America route has tightened as China is exporting a lot of electric vehicles (EVs) to Brazil. A market participant told ICIS that Chinese automaker BYD has booked more than 10,000 containers to ship EVs to Brazil in April. Autos are typically transported using roll-on, roll-off (RoRo) ships that are designed to carry wheeled cargo. But the surge in EV imports from China has taken up most of the RoRo capacity, forcing China to send autos in containers, which is more expensive. A 20-foot shipping container can hold one or two vehicles, and a 40-foot container can hold up to four standard-sized cars, according to IncoDocs, a shipping solutions provider. ASIA-US CONTAINER RATES FALL Rates from east Asia and China to both US coasts continue to fall, along with rates from Asia to Europe, as shown in the following charts. Asia-US rates from online freight shipping marketplace and platform provider Freightos were largely steady this week, suggesting to the company's head of research that rates might be nearing a floor. Judah Levine, head of research at Freightos, said if diversions continue into the Q3 peak season months, shippers can expect rates to increase relative to this floor. STRAIT OF HORMUZ Global shippers are watching the situation in the Gulf of Hormuz after Iran’s Revolutionary Guard Corps (IRGC) seized a container ship operated by Mediterranean Shipping Co (MSC) near the Strait. "If attacks like this one continue, broaden, or Iran moves to completely close the strait, Middle East container flows would feel the strongest impact," Levine said. A closure would see ports in Kuwait, Iraq and most of the United Arab Emirates (UAE) become inaccessible. Saudi Arabia, with access to their Red Sea port access already challenged, would see their Gulf port access cut off as well. "These disruptions would also impact container hubs in India some of which are part of services that connect south Asia and the Middle East," Levine said. Container ships and costs for shipping containers are relevant to the chemical industry because while most chemicals are liquids and are shipped in tankers, container ships transport polymers, such as polyethylene (PE) and polypropylene (PP), which are shipped in pellets. They also transport liquid chemicals in isotanks. PORT OF BALTIMORE The Unified Command (UC) continues to remove containers from the Dali and clear wreckage from the collapsed bridge at the entrance to the Port of Baltimore. The US Army Corps of Engineers (USACE) expects to open a limited access channel 280 feet wide and 35 feet deep by the end of April, and are aiming to reopen the permanent, 700-foot-wide by 50-foot-deep federal navigation channel by the end of May, restoring port access to normal capacity. Source: Key Bridge Response 2024 LIQUID CHEM TANKERS US chemical tanker freight rates assessed by ICIS were stable to lower this week with rates for parcels from the US Gulf (USG) to Rotterdam and the USG to Brazil unchanged. However, rates from the USG to Asia ticked lower and all other trade lanes held steady. On this route, there is no shortage of glycol enquiries. From the USG to Rotterdam, there are bits of part cargo space still available for April. Most of the outsiders’ vessels that were on berth have already sailed, and only the regulars remain at this time as they push tonnage availability. Freight rates are now expected to remain steady for the time being. PANAMA CANAL Wait times for non-booked vessels ready for transit edged higher for northbound vessels and were unchanged for southbound vessels this week, according to the Panama Canal Authority (PCA) vessel tracker and as shown in the following image. Wait times last week were 0.9 days for northbound traffic. The Panama Canal Authority (PCA) said current forecasts indicate that steady rainfall will arrive later this month and continue during the rainy season, which would allow the PCA to gradually ease transit restrictions and traffic could return to normal by 2025. Global container shipping major Maersk said it will resume Panama Canal transits for its OC1 service beginning 10 May, ending its “two-loop” setup it established in January because of transit restrictions brought on by a persistent drought. Please see the Logistics: Impact on chemicals and energy topic page Additional reporting by Bruno Menini and Kevin Callahan

19-Apr-2024

LONDON (ICIS)—ExxonMobil Chemical France has announced plans to close its chemical production at Gravenchon, in Normandy in France in 2024, subject to the relevant government approvals. According to a press release, the steamcracker and related derivatives units and logistics facilities will be shut down. The company said the site has lost more than €500 million since 2018 and despite efforts to improve the site’s economics, it remains uncompetitive. According to the ICIS Supply & Demand database, the cracker has the capacity to produce 425,000 tonnes/year of ethylene and 290,000 tonnes/year of propylene and was started up in 1967. A butadiene (BD) unit is also at the site and associated derivatives include polyethylene (PE), polypropylene (PP). ExxonMobil's nearby Port Jerome refinery will continue to operate supplying fuels, lubricants, basestocks and asphalt. The closure will impact 677 jobs through 2025. ExxonMobil said this planned closure is entirely separate from the Esso S.A.F. announcement regarding its proposed sale of the Esso Fos-sur-Mer refinery and South France logistics assets. Charles Amyot, president of ExxonMobil companies in France said: “It has been a very difficult decision for us to take, but we cannot continue to operate at such a loss.” This week Saudi Arabia's Sabic also revealed plans to permanently close its Olefins 3 cracker – one of two at their Geleen, Netherlands site.

11-Apr-2024