Polypropylene (PP)

SAO PAULO (ICIS)–Braskem will be able to deliver material to its customers from its other three sites in Brazil after it declared force majeure at its Triunfo complex following heaving flooding in the area, Brazilian polymers major CFO Pedro Freitas said on Thursday. Freitas did not clarify when the company expects its facilities in Triunfo, state of Rio Grande do Sul, could return to operations as the area reels from floods which started on 29 April. Freitas said Braskem’s facilities there – which account for 30% of its production capacity in Brazil – were not directly affected by the flooding, but the company is founding difficulties in transport to and from the complex. The floods in Rio do Grande do Sul, Brazil’s worst in 80 years, have caused widespread road blockages, landslides and a dam collapse. “The blockages made our operations inviable. Our assets are 100% safe and were not affected, but we are having difficulties with transport: from the coaches transporting our employees to the trucks taking material out,” said Freitas. “We contemplated bringing employees in by helicopter, but that wasn’t viable in for an extended period to keep operations running. In those conditions, we decided to stop operations in a safe and controlled manner.” The CFO was speaking to reporters and chemical equity analysts on Thursday following the publication of Braskem’s Q1 financial results. Despite Freitas’ assurances, the company only produces some polyethylene (PE) grades at its Triunfo facilities, and ⁠sources have said supply of products such as high density polyethylene (HDPE) and low density polyethylene (LDPE) could tighten in the force majeure goes on for an extended period. The same happens for some polypropylene (PP) products. In Brazil, Braskem is the sole manufacturer of PE and PP. Its market shares in 2023 were about 56% and 70%, respectively, according to figures from the ICIS Supply & Demand Database (SNDD). Brazil’s PP capacity is nearly 2 million tonnes/year, while PE capacity is about 3 million tonnes/year, of which 41% is HDPE, 33% is linear low density polyethylene (LLDPE) and 26% is LDPE. The Triunfo complex can produce 740,000 tonnes/year of PP, 550,000 tonnes/year of HDPE, 385,000 tonnes/year of LDPE and 300,000 tonnes/year of LLDPE. Triunfo PP capacity accounts for nearly 37% of Brazil’s PP capacity, while PE capacity accounts for about 40%. Difficulties in transport of employees at the Triunfo petrochemicals hub has also been the main reason for other chemicals companies in the complex such Innova and Arlanxeo to declare force majeure from their facilities. RAINS RETURN Rio Grande do Sul’s floods have brought the state to a standstill and, to make matters worse, rains returned on Wednesday, 8 May and forced some rescue operations for the more than 100,000 residents displaced to be suspended. In those conditions, Freitas would not venture in forecasting when the Triunfo complex could return to operations. “It could be some days still [to return to normal operations], perhaps more than a week. But with the rain back, we cannot really forecast when it will be,” said Freitas. “But we are optimising our sales from our other sites in the states of Sao Paulo, Rio de Janeiro and Bahia.” RECOVERY AT LAST? Braskem’s CEO, Roberto Bischoff, also present at the press conference, concluded saying that Braskem’s improved earnings during Q1 were the sign that things were improving for the company and Brazil’s chemicals producer generally. Earnings before interest, taxes, depreciation, and amortization (EBITDA) improved both year on year and quarter on quarter, although sales posted a more mixed result while the company posted again a net loss for the quarter. Braskem (in $ million) Q1 2024 Q1 2023 Change Q4 2023 Change Q1 vs Q4 Sales 3,618 3,743 -3% 3,369 7% EBITDA 230 205 12% 211 9% Net profit/loss -273 35 N/A -317 -14% “We are seeing better spreads in petrochemicals. After the efforts by the company to improve our financial resilience, we expect the results of that will continue showing for the rest of 2024,” concluded the CEO. Front page picture: Braskem's facilities in Triunfo, Brazil (Source: Braskem) With additional reporting by Bruno Menini

09-May-2024

LONDON (ICIS)–Join European senior editor manager Vicky Ellis, as she talks to European and African PE/PP senior editor Ben Lake and Turkey PE/PP senior editor manager Samantha Wright. The group discuss the coming month, as players see sentiment cool from a hectic first quarter. Senior analyst Lorenzo Meazza also drops in to react to LyondellBasell's announcement that it plans to "review" all European polymer and olefin assets,  following on from announcements of closures of ExxonMobil and SABIC crackers.

09-May-2024

LONDON (ICIS)–LyondellBasell has launched a strategic review of the bulk of its operations in Europe, the producer said on Wednesday, based on its strategy to focus on assets perceived to have long-lasting competitive advantage. The producer will conduct a review of its European olefins, polyolefins, intermediates and derivatives businesses, driven by its move announced last year to reinvest in its strongest performing operations. "At the 2023 Capital Markets Day, we stated our intent to concentrate our portfolio around businesses with long-lasting competitive advantage and to reinvest around those advantaged areas generating superior returns at meaningful scale. These criteria have not changed," said Lyondell CEO Peter Vanacker. The strategy announced at the 2023 investor day was based around three pillars: prioritizing growth spending on businesses where the company “has leading positions in expanding and well-positioned markets”, growing circular solutions earnings to $1 billion/year by 2030, and shifting from cost controls to a broader idea of value creation. Energy-intensive industries in Europe have been challenged by the sharp increase in gas prices seen since Russia’s invasion of Ukraine, which remain substantially above pre-war and pre-pandemic norms despite falling dramatically since the nadir of winter 2022. Described by former BASF chief Martin Brudermuller earlier this year as a “systemic” change to the European operating environment, the higher cost of operating Europe has prompted a number of reviews by large global players. BASF is looking to cut €1 billion off the annual operating costs of its Ludwigshafen, Germany, complex. The company tapped plant sale specialists International Process Plants this week to explore the sale of its Ludwigshafen ammonia, methanol and melamine units, idled in 2023 due to high production costs. Dow also announced plans to review underperforming and smaller assets. A significant proportion of any cuts had been expected to land in Europe, although the US major has not given an update on the process since it was announced in early 2023. Indorama Ventures is also currently reviewing six assets out of its "West" portfolio for potential shutdown. While global gas pricing has come down, the cost of shipping gas will always be higher than sending it through a dedicated pipeline, as was the case with the Russia-derived natural gas that made up around half of the EU’s energy consumption prior to the war. As part of its stated intent to continue developing its sustainable and circular business, investments in a commercial-scale MoReTec plant, LyondellBasell's proprietary technology to convert plastic waste into liquid raw materials, and the development of a circularity hub in the Cologne, Germany region, will continue as planned, the company said. “The company will prioritize its investments to align operations with our circularity and net zero ambitions," Vanacker added. "We understand that strategic assessments can create uncertainty for our employees and customers, but we are committed to operate our assets safely and reliably throughout this process." LyondellBasell European prodcution Product Capacity (kt) Ethylene 1,805 HDPE 1,260 LDPE 740 MTBE 810 Polypropylene 2,175 Propylene 990 Propylene Oxide 785 Styrene 680 TBA 970 Update re-leads, adds detail throughout Additional reporting by Graeme Paterson, infographics by Yashas Mudumbai

08-May-2024

SINGAPORE (ICIS)–Saudi Aramco's net income fell by 14.4% year on year to Saudi riyal (SR) 102.3 billion in the first quarter amid lower crude oil volumes and weakening downstream margins, the energy giant said on Tuesday. in SR billions Q1 2024 Q1 2023 % Change Sales 402.04 417.46 -3.7 Operational Profit 202.05 222.18 -9.1 Net profit 102.27 119.54 -14.4 Early this year, Saudi Arabia’s government ordered Aramco to halt its oil expansion plan and to target a maximum sustained production capacity of 12m barrels/day, 1m barrels/day below the target announced in 2020. In the first quarter, Aramco's downstream income before interest, income taxes and zakat (annual Islamic tax) slumped by 64% year on year to SR4.62 billion. The drop in downstream earnings reflects weakening refining and chemicals margins, partially offset by inventory valuation movement, it said. The drop in group earnings was partially offset by lower production royalties, an increase in crude oil prices compared to the same period last year and lower income taxes and zakat. Despite having a capacity of 12 million barrels/day, Saudi Arabia currently produces about 9 million barrels/day as part of production cuts initiated by OPEC and its allies in October 2022 and further voluntary cuts by Saudi Arabia and other OPEC+ members in April 2023, all designed to stabilize oil prices. Following an OPEC+ meeting in June 2023, Saudi Arabia – the world's top crude exporter – announced a further oil production cut of 1 million barrels/day. “Looking ahead, I expect our portfolio to continue to evolve as we aim to contribute to an energy transition that offers solutions to climate challenges, but at the same time recognizes the need for affordable, reliable, and flexible energy supplies," added Amin Nasser, Aramco's President and CEO. Aramco's chemicals arm SABIC and China's Fujian Energy and Petrochemical Group Co held a groundbreaking ceremony to mark the start of construction at the SABIC Fujian Petrochemical Complex in China's Fujian province during the first quarter. The project will include a mixed-feed steam cracker with up to 1.8m tonne/year ethylene (C2) capacity and various downstream units producing ethylene glycols (EG), polyethylene (PE), polypropylene (PP) and polycarbonate (PC), among other products. Thumbnail photo : One of Aramco's US offices (Source: Saudi Aramco)

07-May-2024

SINGAPORE (ICIS)–Click here to see the latest blog post on Asian Chemical Connections by John Richardson. No matter which petrochemical or polymer you examine, the story is similar. To illustrate this point, let’s today look at polyvinyl chloride (PVC). As China’s economy boomed, largely thanks to the growth in its exports, so did its petrochemicals demand, increasing the gap between China’s consumption and that of the much more populous Developing World ex-China region. China’s 2008-2009 US$586bn economic stimulus package – which largely went into housing and infrastructure – seems to have had a much bigger effect on the country’s PVC demand than in some other products. Up until the Evergrande turning point in September 2021, China’s investment in housing and infrastructure continued at apace. It appears as if stimulus greatly increased the importance of Chinese PVC demand as a driver of global PVC demand: Between 1992 and 2008, China’s share of global demand averaged 17% per year; in 2009-2024, the ICIS Supply & Demand Database expects China’s share to reach 40%. China’s demand growth averaged 10% per annum between 1992 and 2023. But growth is forecast to decline to 3% per year in 2024-2030. This decline is in line with what ICIS expects in other products. Between 1992 (the start of what I see as the Petrochemicals Supercycle) and 2023, global PVC capacity exceeding demand was estimated by ICIS as averaging 8m tonnes a year. As with many other products, ICIS forecasts a big increase in global PVC capacity exceeding demand in 2024 -2030. During this period, capacity exceeding demand is expected to average 15m tonnes a year. In another parallel with other products, China’s self-sufficiency in PVC has reached the point where it has swung from being a major net importer to being a net exporter. Trade tensions between China and the West have been building since Mike Pence, the then US Vice President, made a landmark speech in October 2018. Could this translate to more protectionism in global PVC markets? It is a scenario worth considering as China seeks to increase its exports, challenging the US which accounts for the lion’s share of export trade. During the Petrochemicals Supercycle, the world was becoming ever-more globalised rather than what we are seeing today – the reverse. China was the tide that lifted all ships. Almost every year, its growth surprised on the upside, guaranteeing success for even the least-competitive plants. We didn't we have to worry about big increases in China’s self-sufficiency in PVC, polyethylene (PE) and polypropylene (PP). Now everything has changed, making big picture analysis of China’s economic problems and the global geopolitical landscape crucial. This kind of analysis has become as important if not more important than studying cost-per-tonne economics. Editor’s note: This blog post is an opinion piece. The views expressed are those of the author, and do not necessarily represent those of ICIS.

07-May-2024

SAO PAULO (ICIS)–Here are some of the stories from ICIS Latin America for the week ended on 3 May. NEWS Besieged by imports, Brazil’s chemicals put hopes on hefty import tariffs hike Brazilian chemicals producers are lobbying hard for an increase in import tariffs for key polymers and petrochemicals from 12.6% to 20%, and higher in cases, hoping the hike could slow down the influx of cheap imports, which have put them against the wall. Mexico’s manufacturing slows on weaker exports, Chinese competition Mexico’s manufacturing sectors slowed down slightly in April on the back of tough competition, particularly from China, and weak demand from abroad, which caused a fall in output, analysts at S&P Global said on Thursday. Brazil’s manufacturing at nearly three-year high on booming demand Brazil's manufacturing sectors continued booming in April on the back of a sharp increase in new business intakes, which led to higher output and job creation, analysts at S&P Global said on Thursday. Mexico increases PET import tariff again in attempt to shield economy In the last week of April, Mexican President Andres Manuel Lopez Obrador introduced an amended version of the Tariff within the General Import and Export Duties Law to enforce import duties, or temporary duties, on products falling under 504 tariff items, including polyethylene terephthalate (PET) resin. These new duties will vary from 5% to 50%. Brazil's Braskem Q1 resin sales fall 5% yearly, on prioritizing sales with higher added value Braskem resin sales in its domestic Brazilian market dropped by 5% in Q1, year on year, on the back of prioritizing sales with higher added value in the period, the Brazilian petrochemicals major said on Friday in its quarterly production and sales report. INSIGHT: Six decades on, Brazil’s Unigel founder fights the ultimate battle The founder of Unigel, aged 87, is actively fighting the Brazilian chemicals and fertilizers producer’s most decisive battle, one for its survival, as it tries to restructure its debts, one step away from bankruptcy. PRICING Lat Am PE domestic prices fall in Argentina, Brazil on cheaper imports, soft demand Domestic polyethylene (PE) prices fell in Argentina and Brazil due to competition with cheaper imports and soft demand. In other Latin American countries, prices were unchanged. LatAm PP domestic prices fall in Argentina, Colombia, Mexico on lower feedstock costs, soft demand Domestic polypropylene (PP) prices fell in Argentina, Colombia and Mexico on the back of lower feedstock costs and soft demand.

06-May-2024

HOUSTON (ICIS)–Global average rates for shipping containers rose for the first time since January, workers at freight rail carriers Canadian National (CN) and Canadian Pacific Kansas City (CPKC) have voted in favor of a strike, and the US regulator that oversees railroads finalized a rule allowing reciprocal switching, highlighting this week’s logistics roundup. CONTAINER RATES Shipping container rates have been rising steadily since December when attacks by Houthi rebels on commercial vessels in the Red Sea forced carriers to take the longer route around the tip of the African continent before leveling off last week. This week, the global average for 40-foot shipping containers rose by 1%, according to supply chain advisors Drewry and as shown in the following chart. Rates from Shanghai to the US East Coast edged slightly higher, but rates from China to the West Coast edged slightly lower, as shown in the following chart. Judah Levine, head of research at online freight shipping marketplace and platform provider Freightos, said that the overall container market has settled into a new routine that avoids the Red Sea. “Though significant backlogs, congestion and equipment shortages seen during the first few weeks of the crisis have dissipated, adjustments have resulted in some moderate but ongoing disruptions,” Levine said in a weekly update. He said that even after falling drastically since the beginning of the year, prices remain well above normal and are likely to increase relative to this new floor as demand is set to increase for peak season. Container ships and costs for shipping containers are relevant to the chemical industry because while most chemicals are liquids and are shipped in tankers, container ships transport polymers, such as polyethylene (PE) and polypropylene (PP), are shipped in pellets. They also transport liquid chemicals in isotanks. LIQUID CHEMICAL TANKERS US liquid chemical tanker freight rates assessed by ICIS were unchanged this week. From the US Gulf (USG) to Asia, the market has been quieter this week as a holiday-shortened week has sidelined some key players. There have been only a few parcels quoted, which is placing downward pressure on freight rates for smaller lots. Larger base cargoes of monoethylene glycol (MEG), methyl tertiary butyl ether (MTBE), and methanol have been popular chemicals on this route, keeping larger freight rates steady. From the USG to India, the market has been very quiet. PORT OF BALTIMORE Since the opening of a fourth channel into the Port of Baltimore, 171 commercial vessels have transited the waterway, including five of the vessels that were trapped inside the port after the containership Dali struck the Key Bridge, causing it to collapse, according to the Unified Command (UC). The MSC Passion III entered the port on 29 April, according to vesselfinder.com, making it the first container ship to enter the port since the accident. The closing of the port did not have a significant impact on the chemicals industry as chemicals make up only about 4% of total tonnage that moves through the port, according to data from the American Chemistry Council (ACC). The ACC said less than 1% of all chemicals involved in waterborne commerce, both domestic and trade volumes, pass through Baltimore. But a market participant in Ohio told ICIS previously that it is seeing delays in delivery times for imports as vessels originally destined to offload in Baltimore are getting re-routed to other ports. PANAMA CANAL Wait times for non-booked vessels ready for transit edged for higher both directions this week, according to the Panama Canal Authority (PCA) vessel tracker and as shown in the following image. Wait times a week ago were 2.5 days for northbound traffic and 5.6 for southbound traffic. The PCA will increase the number of slots available for Panamax vessels to transit the waterway beginning 16 May and will add another slot for Neopanamax vessels on 1 June based on the present and projected water levels in Gatun Lake. RAILROADS Workers at freight rail carriers Canadian National (CN) and Canadian Pacific Kansas City (CPKC) have voted in favor of a strike. A first work stoppage could occur as early as 22 May, if no new collective agreements are reached by then, officials at labor union Teamsters Canada Rail Conference (TCRC) said in a televised announcement on 1 May. The rail carriers warned that a work stoppage would disrupt supply chains throughout North America and constrain trade between Canada and the US and Mexico. The two railroads account for the bulk of freight rail traffic in Canada. Meanwhile, chemical industry participants were largely supportive of a final rule adopted by the Surface Transportation Board (STB) on reciprocal switching for inadequate service by railroads, but think the scope was too narrow and it does not cover a significant portion of rail traffic. For the first time, the STB said it is requiring that three service metrics be maintained on a standardized basis across all Class 1 railroads. In the US, chemical railcar loadings represent about 20% of chemical transportation by tonnage, with trucks, barges and pipelines carrying the rest. In Canada, chemical producers rely on rail to ship more than 70% of their products, with some exclusively using rail. Rail is also the predominant shipping method for US ethanol. Additional reporting by Kevin Callahan and Stefan Baumgarten Please see the Logistics: Impact on chemicals and energy topic page

03-May-2024

SINGAPORE (ICIS)–SABIC's net income fell by 62% year on year to Saudi Riyal (SR) 250 million in the first quarter amid a drop in prices and sales volumes, the chemicals major said late on Wednesday. Losses from discontinued operations continue to weigh on results Overcapacity persists, pressuring the industry as market growth lags – CEO Spending range of $4 billion to $5 billion expected for 2024 in Saudi riyal (SR) billions Q1 2024 Q1 2023 % Change Sales 32.69 36.43 -10 Operational profit 1.21 1.76 -31 Net income 0.25 0.66 -62 "The decrease in net profit is attributed to lower revenues, lower results from associates and joint ventures in addition to losses from discontinued operations," SABIC said in a filing on the Saudi bourse, Tadawul. SABIC swung to a net loss of Saudi riyal (SR) 2.77bn ($739m) in 2023, largely due to one-off losses related to a divestment. Q1 revenue fell following a 3% decline in average selling prices and a 7% reduction in sales quantities. "Global economic uncertainty remained high during the first quarter of 2024, caused by geopolitical and logistical issues. Adding to these challenges were high global inflation levels and strict lending policies," SABIC CEO Abdulrahman Al-Fageeh said in a separate statement. Al-Fageeh in an investor call cautioned that overcapacity remains a challenge for the industry, creating a gap between supply and demand that is likely to persist throughout 2024. While positive demand signals emerged in Q1 2024, "the year outlook remains uncertain as the world still navigates through geopolitical situations with high inflation", he said. SABIC plans to adopt a disciplined approach to capital expenditure, projecting a spending range of $4 billion to $5 billion for the year, compared with $3.5 billion to 3.8 billion last year. NEW PROJECTS SABIC has started construction of its $6.4bn manufacturing complex in China’s southern Fujian province. The project "would add a qualitative range of products to SABIC’s portfolio of chemicals and polymers and enhance the company's presence in the Chinese market", the company said. The project will include a mixed-feed steam cracker with up to 1.8m tonne/year ethylene (C2) capacity and various downstream units producing ethylene glycols (EG), polyethylene (PE), polypropylene (PP) and polycarbonate (PC), among other products. SABIC also inaugurated the world’s first large-scale electrically heated steam olefins cracking furnace in Netherlands, which will pave the way for the company to fulfill its commitment to reach carbon neutrality by 2050. SABIC is 70%-owned by energy giant Saudi Aramco. ($1 = SR3.75) Thumbnail photo by SABIC Focus article by Nurluqman Suratman

02-May-2024

SAO PAULO (ICIS)–Brazilian chemicals producers are lobbying hard for an increase in import tariffs for key polymers and petrochemicals from 12.6% to 20%, and higher in cases, hoping the hike could slow down the influx of cheap imports, which have put them against the wall. For some products, Brazil’s chemicals trade group Abiquim, which represents producers, has made official requests for the import tariffs to go up to a hefty 35%, from 9% in some cases. On Tuesday, Abiquim said several of its member companies “are already talking about hibernating plants” due to unprofitable economics. It did so after it published another set of somber statistics for the first quarter, when imports continued entering Brazil em masse. Brazil’s government Chamber of Foreign Commerce (Camex) is concluding on Tuesday a public consultation about this, with its decision expected in coming weeks. Abiquim has been busy with the public consultation: it has made as many as 66 proposals for import tariffs to be hiked for several petrochemicals and fertilizers, including widely used polymers such polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), or expandable PS (EPS), to mention just a few. Other chemicals trade groups, as well as companies, have also filed requests for import tariffs to be increased. In total, 110 import tariffs. HARD TO FIGHT OFFBrazil has always depended on imports to cover its internal chemicals demand, but the extraordinary low prices coming from competitors abroad has made Brazil’s chemicals plant to run with operating rates of 65% or lower. More and more, the country’s chemicals facilities are becoming white elephants which are far from their potential, as customers find in imported product more competitive pricing. Considering this dire situation and taking into account that the current government in Brasilia led by Luiz Inacio Lula da Silva may be more receptive to their demands, Abiquim has put a good fight in publica and private for measure which could shore up chemical producers’ competitiveness. This could come after the government already hiked import tariffs on several products in 2023 and re-introduced a tax break, called REIQ, for some chemicals which had been withdrawn by the previous Administration. While Brazil’s chemicals production competitiveness is mostly affected by higher input costs, with natural gas costs on average five times higher than in the US, the industry is hopeful a helping hand from the government in the form of higher import tariffs could slow down the flow of imports into Brazil. As a ‘price taker region’ given its dependence on imports, Latin American domestic producers have taken a hit in the past two years. In Brazil, polymers major Braskem is Abiquim’s commanding voice. Abiquim, obviously, has always been very outspoken – even apocalyptic – about the fate of its members as they try to compete with overseas countries, namely China who has been sending abroad product at below cost of production. The priorities in China’s dictatorial system are not related to the balance of markets, but to keep employment levels stable so its citizens find fewer excuses to protest against the regime which keeps them oppressed. Capitalist market dynamics are for the rest of the world to balance; in China’s dictatorial, controlled-economy regime the priority is to make people feel the regime’s legitimacy can come from never-ending economic growth. The results of such a policy for the rest of the world – not just in chemicals but in all industrial goods – is becoming clear: unprofitable industries which cannot really compete with heavily subsidized Chinese players. The results of such a policy in China are yet to be seen, but subsiding at all costs any industry which creates employment may have debt-related lasting consequences: as they mantra goes, “there is no such thing as a free lunch.” Abiquim’s executive president urged Lula’s cabinet to look north, to the US, where the government has imposed hefty tariffs on almost all China-produced industrial goods or raw materials for manufacturing production. “[The hikes in import tariffs] have improved the US’ scenario: despite the aggressive advance in exports by Asian countries, the drop in US [chemicals] production in 2023 was of 1%, while in Brazil the index for production fell nearly by 10%,” said Andre Passos. “The country adopted an increase in import taxes of over 30% to defend its market from unfair competition. The taxation for some inputs, such as phenol, resins and adipic [acid], for example, exceeds three digits. “Here, we are suggesting an increase in rates to 20% in most claims … We need to have this breathing space for the industry to recover,” he concluded. As such, the figures for the first quarter showed no sign of imports into Brazil slowing down. The country posted a trade deficit $9.9 billion during the January-March period; the 12-month accumulated (April 2023 to March 2024) deficit stood at $44.7 billion. A record high of 61.2 million tonnes of chemicals products entered Brazil in Q1; in turn, the country’s industry exported 14.6 million tonnes. Abiquim proposals for higher import tariffs Product Current import tariff Proposed tariff Expandable polystyrene, unfilled, in primary form 12.6% 20% Other polystyrenes in primary forms 12.6% 20% Carboxymethylcellulose with content > =75%, in primary forms 12.6% 20% Other polyurethanes in liquids and pastes 12.6% 20% Phthalic anhydride 10.8% 20%  Sodium hydrogen carbonate (bicarbonate) 9% 35% Copolymers of ethylene and alpha-olefin, with a density of less than 0.94 12.6% 20% Other orthophthalic acid esters 11% 20% Other styrene polymers, in primary forms 12.6% 20% Other silicon dioxides 0% 18% Other polyesters in liquids and pastes  12.6% 20% Commercial ammonium carbonates and other ammonium carbonates 9% 18% Other unsaturated polyethers, in primary forms 12.6% 20% Polyethylene terephthalate, with a viscosity index of 78 ml/g or more 12.6% 20% Phosphoric acid with an iron content of less than 750 ppm 9% 18% Dinonyl or didecyl orthophthalates 11% 20% Poly(vinyl chloride), not mixed with other substances, obtained by suspension process 12.6% 20% Poly(vinyl chloride), not mixed with other substances, obtained by emulsion process 12.6% 20% Methyl polymethacrylate, in primary form  12.6% 20% White mineral oils (vaseline or paraffin oils) 4% 35% Other polyetherpolyols, in primary forms 12.6% 20% Other unfilled epoxy resins in primary forms 12.6% 20% Silicon dioxide obtained by chemical precipitation 9% 18% Acrylonitrile-butadiene rubber in plates, sheets, etc 11% 35% Other organic anionic surface agents, whether or not put up for retail sale, not classified under previous codes 12.6% 23% Phenol (hydroxybenzene) and its salts 7% 20% Fumaric acid, its salts and esters 10 ,8% 20% Plasticizers and plastics 10 ,8% 20% Maleic anhydride 10 ,8% 20% Adipic acid salts and esters 10 ,8% 20% Propylene copolymers, in primary forms 12.6% 20% Adipic acid 9% 20% Unfilled polypropylene, in primary form 12.6% 20% Filled polypropylene, in primary form 12.6% 20% Methacrylic acid methyl esters 10 ,8% 20% Other ethylene polymers, in primary forms 12.6% 20% Acrylic acid 2-ethylhexyl esters 0% 20% 2-Ethylexanoic acid (2-ethylexoic acid) 10. 8% 20% Other copolymers of ethylene and vinyl acetate, in primary forms 12.6% 20% Other unfilled polyethylenes, density >= 0.94, in primary forms 12.6% 20% Polyethylene with a density of less than 0.94, unfilled 12.6% 20% Other saturated acyclic monoalcohol acetates, c atom <= 8 10. 8% 20% Polyethylene with a density of less than 0.94, with filler 12.6% 20% Triacetin 10. 8% 20% Sodium methylate in methanol 12.6% 20% Stearic alcohol (industrial fatty alcohol) 12.6% 20% N-butyl acetate                              11% 20% Stearic acid (industrial monocarboxylic fatty acid) 5% 35% Alkylbenzene mixtures 11% 20% Organic, non-ionic surface agents 12.6% 23% Ammonium nitrate, whether or not in aqueous solution 0.0% 15% Monoethanolamine and its salts 12.6% 20% Isobutyl alcohol (2-methyl-1-propanol) 10.8% 20% Butan-1-ol (n-butyl alcohol) 10.8% 20% Styrene-butadiene rubber (SBR), food grade as established by the Food Chemical Codex, in primary forms 10.8% 22% Styrene                                9% 18% Hexamethylenediamine and its salts 10.8% 20% Latex from other synthetic or artificial rubbers 10.8% 35% Propylene glycol (propane-1, 2-diol) 10.8% 20% Preparations 12.6% 20% Linear alkylbenzene sulfonic acids and their salts 12.6% 23% 4,4'-Isopropylidenediphenol (bisphenol A, diphenylolpropane) and its salts 10.8% 20% Dipropylene glycol 12.6% 20% Butanone (methyl ethyl ketone) 10.8% 20% Ethyl acetate                                 10.8% 20% Methyl-, ethyl- and propylcellulose, hydroxylated 0.0% 20% Front page picture: Chemical production facilities outside Sao Paulo  Source: Union of Chemical and Petrochemical industries in the state of Sao Paulo (Sinproquim) Focus article by Jonathan Lopez Additional information by Thais Matsuda and Bruno Menini

30-Apr-2024

SINGAPORE (ICIS)–Click here to see the latest blog post on Asian Chemical Connections by John Richardson. The thing about petrochemicals is that events in our industry reflect what’s happening in every manufacturing chain and in the broader economy, as we supply indispensable raw materials. China's exports of electric vehicles (but also traditional fossil-fuel motors) and solar panels have soared. This has occurred as local capacity has also soared – and as manufacturing operating rates in general have declined to record lows on weak domestic demand. China’s polypropylene (PP) exports jumped by 96% in Q1 this year over the first quarter of 2023 to 619,367 tonnes. If the same export momentum was maintained throughout 2024, this year’s total exports would reach 2.5m tonnes compared with 1.3m tonnes in 2023. The early ICIS data for 2024 suggests that this year’s PP operating rate in China will be just 75% compared with the 1992-2023 average of 87% – during the Petrochemicals Supercycle. In 1992-2023, China’s PP capacity as a percentage of demand averaged 79%. This looks set to rise to 140% in 2024-2030. Growing trade tensions – recently underlined by US Treasury Secretary Janet Yellen’s comment that China’s capacity in new green industries was “too big” for the world to absorb – tell us this: China will struggle to grow exports by enough to maintain GDP growth at 4-5% per year. Increasing domestic consumption to achieve the same end also seems very difficult because of the end of the real estate bubble, an ageing population and the just-mentioned trade tensions. “Only 37% of China’s national income is spent by Chinese households on goods and services. That level is lower than anywhere else in the world—except for a few small tax havens and commodity hyper-exporters when prices are high,” wrote Mathew Klein on his The Overshoot blog. Early data for this year suggest that China’s PP demand growth in 2024 will be 2%. Growth in 2023 appears to have been flat. This suggests that demand growth has entered a New Normal of 1-3% per year versus the 1992-2021 Petrochemical Supercycle average of 12%. The China CFR PP price spread between CFR Japan naphtha costs has averaged just $203/tonne so far this year, the lowest since our price assessments for the above three grades began in 2003. I keep reflecting-back on Gillian Tett’s masterful Fool’s Gold, her account of the Global Financial Crisis. In the book, she details how too few bankers, politicians, regulators and financial analysts were able to take a helicopter view of events that led up to 2008 because they were trapped in “silos” of specialist knowledge. This meant that the problems with mortgage-backed securities were largely missed. So I believe has been the case with the events in and surrounding China. Experts in PP and other petrochemicals were good at building plants and in sales and marketing, but not so good at seeing connections between China’s demographics, its property bubble, its relatively weak domestic consumption and the shift in its relationship with the West. Editor’s note: This blog post is an opinion piece. The views expressed are those of the author, and do not necessarily represent those of ICIS.

30-Apr-2024