Ethyl acetate (ETAC) & butyl acetate (BUTAC)

SINGAPORE (ICIS)–Here are the top stories from ICIS News Asia and the Middle East for the week ended 27 September. Asia BD market sentiment to be driven by domestic China fluctuations By Ai Teng Lim 24-Sep-24 13:05 SINGAPORE (ICIS)–Asian spot prices for butadiene (BD) imports made sizeable gains this month, alongside a bullish domestic yuan-denominated market in China. China petrochemical futures rally on fresh economic measures By Fanny Zhang 24-Sep-24 16:42 SINGAPORE (ICIS)–China’s petrochemical futures markets surged on Tuesday following announcement of fresh measures to rev up activity in the world’s second-biggest economy. India to be among global oil demand growth drivers in 2023-2050 – OPEC By Nurluqman Suratman 25-Sep-24 13:09 SINGAPORE (ICIS)–India is expected be a major driver of global long-term oil demand growth through to 2050, alongside the Middle East and Africa, OPEC said in a report. Market diversification key to weather challenges in Asia recycling By Arianne Perez 23-Sep-24 12:46 SINGAPORE (ICIS)–Asian producers of recycled polyolefins have been struggling to stay afloat since 2023 amid a general slump in trade of fast-moving consumer goods (FMCGs). Slow recovery in Asia petrochemical markets; Q4 sentiment bearish By Jonathan Yee 25-Sep-24 14:26 SINGAPORE (ICIS)–Macroeconomic challenges in China have kept overall sentiment bearish in Asia’s petrochemical markets, but there was a late pick-up in demand for some products just days before a week-long holiday in the country in October. Intra-Asia VAM spot trades may contract amid downstream woes By Hwee Hwee Tan 26-Sep-24 10:46 SINGAPORE (ICIS)–Asia's import demand for vinyl acetate monomer (VAM) is being dampened by slower demand and macroeconomic woes persisting into the fourth quarter of 2024. INSIGHT: China 2024 crude imports, throughput to fall on economic headwinds By Patricia Tao 27-Sep-24 14:27 SINGAPORE (ICIS)–China is expected to record lower crude oil imports and refinery throughput this year on weaker-than-expected distillates demand during the typical peak consumption season amid economic headwinds and increased market penetration of alternative fuels. PODCAST: Asia fatty alcohol market uptrend may prompt switch to LAB By Damini Dabholkar 24-Sep-24 14:24 SINGAPORE (ICIS)–Prices of Asia's fatty alcohol midcuts may be nearing a ceiling as demand from Europe is expected to wane after October, given the looming EU Deforestation Regulation (EUDR) which starts on 30 December.

30-Sep-2024

NEW YORK (ICIS)–Celanese sees a major growth opportunity in low carbon, recycled and bio-based materials, its CEO said. In January 2024, the company announced it started running a carbon capture and utilization (CCU) project at its Clear Lake, Texas, site as part of its Fairway Methanol joint venture with Mitsui & Co. The project is expected to capture 180,000 tonnes/year of CO2 industrial emissions and produce 130,000 tonnes/year of low-carbon methanol. “We actively capture carbon off some of the major producers in Clear Lake, Texas, at our site and we take those CO2 emissions… and we recycle it back into the ATR (autothermal reformer),” said Lori Ryerkerk, CEO of Celanese, on a webinar hosted by Chemical Marketing & Economics (CME-STEM). This low-carbon methanol can then be used to produce vinyl acetate monomer (VAM), vinyl acetate ethylene (VAE) emulsions and other downstream products, she added. “We have customers like Amazon that want a lower carbon footprint product, and we are able to meet that customer need,” said Ryerkerk. The CCU unit takes CO2 emissions that were otherwise being vented into the atmosphere from both Celanese and from third parties to use as a feedstock. “The exciting thing about this project is that we started it as a way to make more methanol and have found the value is also there for being able to produce through mass balance tracking, a green product that can be certified under the ISCC carbon footprint certification system,” said Ryerkerk. In March 2024, Celanese announced that the International Sustainability and Carbon Certification (ISCC) group certified its Low Carbon CCU Methanol under the ISCC Carbon Footprint Certification (CFC) system. Low Carbon CCU Methanol demonstrated a greater than 70% reduction in carbon footprint relative to a global average benchmark for fossil-based methanol production, as included in EU legislation, according to Celanese. “This is an area of growth for us – to be able to expand our green product offering,” said Ryerkerk. In Celanese’s Sustainable Solutions portfolio, those using carbon capture fall under the ECO-C label, with recycled content under ECO-R and bio-based content under ECO-B. RECYCLED AND RECYCLABLE CONTENTOn the recycled content side, Celanese in Europe recycles nylon airbags into high quality nylon which can be used by customers such as furniture giant IKEA, said Ryerkerk. IKEA has a goal of using only recycled or renewable-based plastic in all its products by 2030. “In India, we take fishing nets that are recovered from the sea, clean them, sort them and recycle them into a nylon grade which is used for furniture,” said Ryerkerk. “We have the ability to make recycled [products] across much of our portfolio now,” she added. Celanese also works with customers to develop products that are recyclable. An example is its NEOLAST fiber made from thermoplastic copolyester elastomer which can be blended with other fibers at a level anywhere from 2-40% of total fiber content. “We developed this fiber together with Under Armour to solve a problem they had with elastane (Spandex) because Spandex is energy intensive, uses solvents that aren’t very environmentally friendly, and tends to shed a lot of plastic fibers,” said Ryerkerk. “The great news is that this is recyclable. Elastanes are not. It’s solvent-free so more environmentally friendly from a production standpoint and it has better characteristics of wear – it’s more colorfast, better wicking, all these things,” she added. NEOLAST is in the very early stages of sales with Under Armour producing some products with the fiber and Celanese talking to a number of other companies interested in using it, the CEO said. “This is a long-term commitment. This has been in development for many, many years. We’ve just introduced it, and it will probably be several years yet before we really see widespread use of it,” said Ryerkerk, who noted that most of these types of new products take three to five years to develop. BIO-BASED CONTENTOther customers such as toy producer LEGO aim to use more renewable-based content. “We are able, since we start with bio-methanol and bio-ethylene – these building block chemicals – to make a bio-content material which we call ECO-B for those customers [that want to use] a non-fossil fuel feedstock,” said Ryerkerk. In H1 2024, 30% of the resin LEGO purchased was certified according to mass balance principles, which translated into an estimated average of 22% renewable sources. The company plans to “significantly increase this percentage” through the rest of 2024 and beyond. Celanese considers its ability to offer low carbon, recycled and bio-based products a unique competitive advantage. “Many of our competitors may offer one of these, but we’re probably one of the few that have the ability right now to offer all of them – and offer them in a way that is certified,” said Ryerkerk. GROWTH PROSPECTSCelanese’s Sustainable Solutions portfolio represents just around 5% of sales today but is growing double digits on a percentage basis every year, said the CEO. A stronger economic recovery would be a tailwind as these products are typically more expensive. “We’ll see what happens with the economy. Let’s be honest – most people are more interested in these things when the economy is better than when the economy is tough like it is right now,” said Ryerkerk. “But there are a lot of companies that have made commitments to go to more sustainable solutions. As our volumes grow, we’re able to make sustainable solutions more affordable for them… I think it is going to be quite some time before it is the majority of our portfolio, but that’s OK because we need time to build our capabilities as well,” she added. Focus article by Joseph Chang

27-Sep-2024

LONDON (ICIS)–Ahead of the approaching European Petrochemical Conference (EPCA) in Berlin 7-10 October, ICIS editors discuss market conditions in a variety of solvent markets. Market updates on methyl ethyl ketone (MEK), methyl isobutyl ketone (MIBK), isopropanol (IPA), phenol, acetone, toluene, mixed xylenes, glycol ethers and propylene glycol ethers, butyl acetate and ethyl acetate Trade flows and impact of freight rate movements Overcapacity versus low demand levels Upcoming maintenance programs In this episode, Jane Massingham talks to editors Nick Cleeve, Jane Gibson, Zubair Adam, Cameron Birch and Marion Boakye.

27-Sep-2024

HOUSTON (ICIS)–More than 4 million outages were reported in the southeastern US on Friday after Hurricane Helene made landfall as a powerful Category 4 storm in northwestern Florida. The southeastern US does not have a lot of chemical production. But such widespread power outages, in addition to disruptions caused by flooding, will lower demand for plastics and chemicals more broadly. The power outages are concentrated in the US states of South Carolina, Georgia, Florida and North Carolina, according to the website poweroutage.us. Among the few chemical plants near Helene's landfall site are a crude sulphate turpentine refinery and a crude tall oil (CTO) refinery that Kraton owns in Panama City, Florida. Tall oil is a feedstock fatty acids, renewable diesel and sustainable aviation fuel (SAF). Kraton has not returned requests for comment in regard to its preparations for Helene. Since Helene made landfall, it has weakened into a tropical storm, with maximum sustained wind speeds of 45 miles/hour (75 km/hour), according to the National Hurricane Center. The following map shows its projected path. Source: National Hurricane Center PORT CLOSURESInbound and outbound traffic at Port Tampa Bay ceased ahead of the storm, and the port's shipping channels were closed. Tampa is an important hub for the US fertilizer industry, hosting corporate offices, trading, product storage, shipping and other logistical operations. Other port closures include Panama City, St Joe, St Petersburg, Manatee and Key West on Florida's west coast, as well as Fernandina, Jacksonville and Canaveral on Florida's east coast. ENERGY DISRUPTIONS The following table shows the disruptions to US Gulf production that were caused by Helene, according to the Bureau of Safety and Environmental Enforcement (BSEE). Total % of US Gulf Oil, bbl/day 441,923 25.25% Gas, million cubic feet/day 363.39 19.81% Source: BSEE Total % of US Gulf Platforms evacuated 27 7.28% Rigs evacuated 1 20% Source: BSEE The Gulf of Mexico accounts for 14% of US production of crude oil and 5% of total dry gas production, according to the Energy Information Administration (EIA). RAIL DISRUPTIONS Railroad company CSX planned to close its TRANSFLO terminals in Tampa and Tampa Port on Thursday. Railroad company Norfolk Southern said that customers with shipments moving through the southeast and mid-Atlantic should prepare for delays. RECONSTRUCTION AND CHEM DEMANDHurricane Helene's current path could put $5.64 billion worth of housing at risk to storm surge flooding, an insurance data company said on Wednesday. Nearly 25,000 residential properties in the Tallahassee and Homosassa Springs metropolitan areas are at risk, said CoreLogic. “Helene has the potential to become a once-in-a-generation storm,” said Jon Porter, chief meteorologist for the meteorology firm AccuWeather. It estimates that most of Florida and much of the southeastern US will be exposed to winds reaching 40-60 miles/hour. AccuWeather expects that most of Florida and all of the states of Georgia, South Carolina and North Carolina are at risk for tornados. For hurricanes in general, reconstruction can translate to increased demand for many chemicals and polymers. The white pigment titanium dioxide (TiO2) is used in paints. Solvents used in paints and coatings include butyl acetate (butac), butyl acrylate (butyl-A), ethyl acetate (etac), glycol ethers, methyl ethyl ketone (MEK) and isopropanol (IPA). Blends of aliphatic and aromatic solvents are also used to make paints and coatings. For polymers, expandable polystyrene (EPS) and polyurethane (PU) foam are used in insulation. Polyurethanes are made of methylene diphenyl diisocyanate (MDI), toluene diisocyanate (TDI) and polyols. High density polyethylene (HDPE) is used in pipe. Polyvinyl chloride (PVC) is used to make cladding, window frames, wires and cables, flooring and roofing membranes. Unsaturated polyester resins (UPR) are used to make coatings and composites. Vinyl acetate monomer (VAM) is used to make paints and adhesives. Thumbnail shows Helene before it made landfall. Image by National Hurricane Center.

27-Sep-2024

HOUSTON (ICIS)–A quarter of US oil production in the Gulf of Mexico remains shut in as Helene becomes close to becoming a major hurricane. The following table shows the disruptions to US Gulf production that were caused by Helene, according to the Bureau of Safety and Environmental Enforcement (BSEE). Total % of US Gulf Oil, bbl/day 441,923 25.25% Gas, million cubic feet/day 363.39 19.81% Source: BSEE Total % of US Gulf Platforms evacuated 27 7.28% Rigs evacuated 1 20% Source: BSEE Hurricane Helene has maximum sustained wind speeds of nearly 110 miles/hour (175 km/hour), which is 1 mile/hour below becoming a major hurricane. It is on track to make landfall in the Big Bend, a sparsely populated region of northwestern Florida. The following map shows the forecasted path of Helene. Source: National Hurricane Center FLORIDA CHEMS AT RISKHelene could threaten Panama City, Florida, where Kraton operates a crude sulphate turpentine refinery and a crude tall oil (CTO) refinery. Tall oil is a feedstock for the production of fatty acids, renewable diesel and sustainable aviation fuel (SAF). Helene's path is too far east to threaten Pensacola, which is home to some nylon and thermoset resin plants. Helene is moving on the opposite side of Texas and Louisiana in the Gulf of Mexico. Those two states are home to most of the refineries, petrochemical plants and LNG capacity of the US. Operations at those plants will not be threatened by Helene. Helene will not make landfall near Tampa Bay, an important hub for the US fertilizer industry. Tampa hosts corporate offices, trading, product storage, shipping and other logistical operations. Nonetheless, Helene will disrupt operations at the port of Tampa Bay. PORTS CLOSED TO TRAFFIC ALONG EASTERN GULF COASTInbound and outbound traffic has ceased among numerous ports along Florida's Gulf Coast, including Port Tampa Bay, an important entrepot. Tampa is in the region that could see a peak storm surge of 5-8 feet (1.5-2.4 meters), as shown in the following map. Source: National Hurricane Center The following table shows some of the other ports in Florida that are closed. Panama City, Florida Port St Joe, Florida St Petersburg, Florida Manatee, Florida Source: US Coast Guard The following ports are open with restrictions. Pensacola, Florida Mobile, Alabama Source: US Coast Guard RAIL DISRUPTIONS Railroad company CSX plans to close its TRANSFLO terminals in Tampa and Tampa Port on Thursday. Railroad company Norfolk Southern said that customers with shipments moving through the southeast and mid-Atlantic should prepare for delays. RECONSTRUCTION AND CHEM DEMANDHurricane Helene's current path could put $5.64 billion worth of housing at risk to storm surge flooding, an insurance data company said on Wednesday. Nearly 25,000 residential properties in the Tallahassee and Homosassa Springs metropolitan areas are at risk, said CoreLogic. “Helene has the potential to become a once-in-a-generation storm,” said Jon Porter, chief meteorologist for the meteorology firm AccuWeather. It estimates that most of Florida and much of the southeastern US will be exposed to winds reaching 40-60 miles/hour. AccuWeather expects that most of Florida and all of the states of Georgia, South Carolina and North Carolina are at risk for tornados. For hurricanes in general, reconstruction can translate to increased demand for many chemicals and polymers. The white pigment titanium dioxide (TiO2) is used in paints. Solvents used in paints and coatings include butyl acetate (butac), butyl acrylate (butyl-A), ethyl acetate (etac), glycol ethers, methyl ethyl ketone (MEK) and isopropanol (IPA). Blends of aliphatic and aromatic solvents are also used to make paints and coatings. For polymers, expandable polystyrene (EPS) and polyurethane (PU) foam are used in insulation. Polyurethanes are made of methylene diphenyl diisocyanate (MDI), toluene diisocyanate (TDI) and polyols. High density polyethylene (HDPE) is used in pipe. Polyvinyl chloride (PVC) is used to make cladding, window frames, wires and cables, flooring and roofing membranes. Unsaturated polyester resins (UPR) are used to make coatings and composites. Vinyl acetate monomer (VAM) is used to make paints and adhesives. Thumbnail photo: Helene. (By the National Hurricane Center) (adds missing world "Gulf" in headline)

26-Sep-2024

SINGAPORE (ICIS)–Macroeconomic challenges in China have kept overall sentiment bearish in Asia’s petrochemical markets, but there was a late pick-up in demand for some products just days before a week-long holiday in the country in October. China fresh economic measures stimulate buying in glycerine market Pre-holiday restocking not as strong as expected Outlook bearish for aromatics Initial excitement over China's new set of economic stimulus appears to be fizzling out based on crude price movement. At midday, Brent crude was down 21 cents at $74.96/bbl, while US crude was down 26 cents at $71.30/bbl, after gaining by more than $1/bbl overnight. China’s measures amid doubts about the world's second-biggest economy's ability to achieve its 5% GDP growth target followed the US Federal Reserve’s jumbo 50-basis point (bps) cut in interest rates on 18 September. People's Bank of China (PBoC) measures announced on 24 September Source: Oxford Economics/China State Council "We believe the recent rapid development in both domestic and external conditions were the major driving forces behind the PBoC's latest move," Oxford Economics' lead economist Betty Wang said in a research note. "Domestically, the weaker-than-expected August economic data suggest that the risk of missing this year's growth target has grown," she said. "Externally, the Fed's outsized rate cuts last week, along with other major central banks' entering easing mode, has eased the depreciation pressure on the Chinese Yuan and provided the PBoC more room to ease monetary policy," Wang added. Concerns about the economic health of the world’s two biggest economies have been weighing down on sentiment across the equities and commodities markets. For petrochemicals, a slower-than-expected demand pick-up ahead of China’s October national holidays have further dimmed prospects of market recovery. Petrochemical demand is typically seasonally strong in September, but pre-holiday restocking in China failed to gain momentum during the month until the government announced on 24 September a basket of measures to boost economic activity. In Asia’s refined glycerine market, buyers in China were making enquiries for spot cargoes. Mid-Autumn holidays early last week in China, Taiwan, Japan, and South Korea had also caused temporary pause in market activities. China’s economy is sputtering amid a property downturn. The sector remained on a slump, with total investments in the industry registering a 10.2% year-on-year decline in January-August 2024, which also weighs down on the construction industry. Property and construction are main downstream industries for petrochemicals. Chinese factories were also in contraction mode for the fourth straight month in August, registering official purchasing managers’ index (PMI) readings of below the expansion treshold of 50. In the polyethylene (PE) pipe market, major suppliers have maintained firm offers to China on recent gains in upstream crude market, while most downstream converters have completed September procurement and were waiting for October offers. Poor demand had recently sent toluene prices in Asia tumbling to year-to-date lows, while prices of solvents such as ethyl acetate (etac) and butyl acetate (butac) have slumped to multi-year lows. ICIS analyst Jimmy Zhang expects most petrochemical products to post price declines in September, extending the weakness in August, amid declines in upstream crude prices and the overall bearish sentiment. ICIS forecasts that 26 out of the 31 products it tracks to post lower average prices this month, led by paraxylene (PX) and purified terephthalic acid (PTA). Focus article by Jonathan Yee and Pearl Bantillo Additional reporting from Judith Wang, Melanie Wee and Helen Yan Thumbnail image: Lianyungang Port in east China's Jiangsu Province on 18 September 2024 (Shuttertock)

25-Sep-2024

SAO PAULO (ICIS)–The Mexican government has amended for the third time the decree regulating import and export permit requirements for several chemicals as well as fuel products and re-opened the door for 20-year permits. Among others, there were amendments published for permits to import key building blocks within the petrochemical industry, such as naphtha; products within the aromatics chain such as benzene and toluene; or within olefins such as ethylene, propylene and butadiene (BD). Within fuels, import permits for jet kerosene or biodiesel were amended, as well as those for feedstocks such as methyl tert-butyl ether (MTBE). Read the list of products in the decree’s annexes (see here, in Spanish). The government said it was aiming to simplify the procedures by providing greater legal certainty and clarity to interested parties, seeking to facilitate compliance with obligations by considering the type of merchandise, its use, and the quantities requested. These import and export permits apply when the product is related to the energy industry or derives or is produced from hydrocarbons. For lubricants and additives, recent regulatory amendments have made it necessary to obtain a Permit for the import of such products, when classified under certain specific tariff codes. Some of the updates referred to the term of the permits for import and export, an aspect in which the government is backtracking its earlier decision from 2020 to withdraw 20-year permits existent at the time, according to a note to customers by the Mexican office of law firm Holland & Knight. “Permits are granted for different validity periods that vary based on the nature of the merchandise and its intended use. For merchandise intended for sporting events and research trials, both for import and export, the validity is sixty days. Standard permits for one year and five years may also be requested,” said Gabriel Ruiz, partner at the law firm. “Furthermore, permits for export may be granted for periods exceeding five to twenty years, provided the need for such permits is justified in the interest of social and economic benefit, subject to approval by the Ministry of Energy (SENER).” The decree also establishes specific requirements for obtaining prior import and export permits, differentiating the requirements based on the validity of each type of permit. Regarding renewals, permits granted for one year may be renewed up to two times for the same validity, while five-year permits may be renewed once for the same duration. For permits exceeding five years intended for export, the renewal will be singular and may extend up to half of the original validity; in the case of twenty-year permits, the renewal will be limited to the same proportion. The new rules published on 18 September came to amend a decree originally issued in December 2020, later amended in November 2022 and November 2023. These amendments were part of wider changes included in the Energy Reform passed in 2013, which sought to liberalize Mexico’s energy sector. The current Administration’s approach, however, has been keeping the state-owned energy companies – crude major Pemex or utility CFE are two of them – at the center of the country’s energy landscape. Front page picture source: Shutterstock

24-Sep-2024

SAO PAULO (ICIS)–The Brazilian government’s committee on foreign trade Gecex-Camex approved late on Wednesday an increase in import taxes on more than 80 chemical and fertilizers products, with the new rate up to 20% for most materials. Among some of the products affected are widely used chemicals such polypropylene (PP), polyethylene, (PE), polyvinyl chloride (PVC), polystyrene (PS), and polyethylene terephthalate (PET). See bottom list for details. Previous rates stood between 7.6% and 12.6%. The new rates will apply from October and are valid for one year. The decision is yet to be approved by Mercosur, the trading common area formed by Argentina, Paraguay, and Uruguay, as well as Brazil, which is the dominant economy in Mercosur. The cabinet, thus, gave in partly to the pressure by chemical producers in Brazil. Earlier this year, individual companies as well as the trade group representing producers, Abiquim, had proposed to increase tariffs in more than 100 chemicals. The decision was widely anticipated by analysts, and it is expected to immediately prop up earnings for some of Brazil’s largest producers such polymers major Braskem or chlor-alkali major Unipar. Brazil has been the recipient of large amounts of imports from Asia and, to a lesser extent, the US which have greatly dented domestic producers’ market share. Sectors that opposed increasing tariffs, including plastic transformers represented by Abiplast, expressed their disappointment after Wednesday’s measure by Gecex-Camex. “[The decision was taken even though] Abiplast and other trade groups have exhaustively demonstrated to the government the harmful impacts of increases in import tariffs on raw materials,” said Jose Ricardo Roriz Coelho, president of Abiplast, in a letter to the trade group’s members seen by ICIS. “We will continue to fight to ensure that these unreasonable measures are reversed.” Product Current Tax Rate Proposed Tax Rate Plaintiff Phosphoric acid with iron content less than 750 ppm 9% 17.5% Abiquim Sodium hydrogen carbonate (bicarbonate) 9% 20%* Abiquim Isobutyl alcohol (2-methyl-1-propanol) 10.80% 20% Abiquim Isobutyl alcohol (2-methyl-1-propanol) 10.80% 20% Elekeiroz Inc. Phenol (hydroxybenzene) and its salts 7.20% 12.6%* Abiquim Phenol (hydroxybenzene) and its salts 7.20% 12.6%* Rhodia Brasil SA Butanone (methyl ethyl ketone) 10.80% 20% Abiquim Ethyl acetate 10.80% 20% Abiquim n-butyl acetate 10.80% 20% Abiquim n-butyl acetate 10.80% 20% Rhodia Brasil SA Other saturated acyclic monoalcohol acetates, c atom <= 8 10.80% 20% Abiquim Methacrylic acid methyl esters 10.80% 20% Abiquim Methacrylic acid methyl esters 10.80% 20% Unigel Holdings Inc. Adipic acid 9% 20% Abiquim Adipic acid 9% 20% Rhodia Brasil SA Maleic anhydride 10.80% 20% Abiquim Maleic anhydride 10.80% 20% Elekeiroz Inc. Fumaric acid, its salts and esters 10.80% 20% Abiquim Dioctyl orthophthalates 10.80% 20% Abiquim Dioctyl orthophthalates 10.80% 20% Elekeiroz Inc. Dinonyl or didecyl orthophthalates 10.80% 20% Abiquim Hexamethylenediamine and its salts 10.80% 20% Abiquim Monoethanolamine and its salts 12.60% 20% Abiquim Other anionic organic surface-active agents, whether or not put up for retail sale, not classified under previous codes 12.60% 20% Abiquim Polyethylene with a density of less than 0.94, with filler 12.60% 20% Abiquim Polyethylene with a density of less than 0.94, without filler 12.60% 20% Abiquim Other unfilled polyethylenes, density >= 0.94, in primary forms 12.60% 20% Abiquim Other copolymers of ethylene and vinyl acetate, in primary forms 12.60% 20% Abiquim Copolymers of ethylene and alpha-olefin, with a specific gravity of less than 0.94 12.60% 20% Abiquim Unfilled polypropylene in primary form 12.60% 20% Abiquim Propylene copolymers, in primary forms 12.60% 20% Abiquim Expandable polystyrene, unfilled, in primary form 12.60% 18% Abiquim Other styrene polymers, in primary forms 12.60% 20% Abiquim Other styrene polymers, in primary forms 12.60% 20% Unigel Holdings Inc. Polyvinyl chloride, unmixed with other substances, obtained by suspension process 12.60% 20% Abiquim Polyethylene terephthalate of a viscosity index of 78 ml/g or more 12.60% 20% Abiquim Polyethylene terephthalate of a viscosity index of 78 ml/g or more 12.60% 20% Alpek Polyester Pernambuco SA Other unsaturated polyethers, in primary forms 12.60% 20% Abiquim Ex – Surfactant polymer class preparation, silicone free 12.60% 12.60% Abiquim Ex – Solvent-free modified polyester class preparation 12.60% 12.60% Abiquim White mineral oils (vaseline or paraffin oils) 3.60% 35% Abiquim Silicon dioxide obtained by chemical precipitation 9% 18% Abiquim Silicon dioxide obtained by chemical precipitation 9% 17% Rhodia Brasil SA Other silicon dioxides 0% 18% Abiquim Commercial ammonium carbonates and other ammonium carbonates 9% 18% Abiquim Styrene 9% 18% Abiquim Styrene 9% 18% Unigel Holdings Inc. Butan-1-ol (n-butyl alcohol) 10.80% 20% Abiquim Butan-1-ol (n-butyl alcohol) 10.80% 20% Elekeiroz Inc. Propylene glycol (propane-1, 2-diol) 10.80% 20% Abiquim Dipropylene glycol 12.60% 20% Abiquim Triacetin 10.80% 20% Abiquim Triacetin 10.80% 20% Denver Specialty Chemicals 2-Ethylexanoic acid (2-ethylexoic acid) 10.80% 20% Abiquim 2-Ethylexanoic acid (2-ethylexoic acid) 10.80% 20% Elekeiroz Inc. Salts and esters of adipic acid 10.80% 20% Abiquim Other esters of orthophthalic acid 10.80% 20% Abiquim Other esters of orthophthalic acid 10.80% 20% Elekeiroz Inc. Phthalic anhydride 10.80% 20% Abiquim Phthalic anhydride 10.80% 20% Petrom Petrochemicals Mogi das Cruzes S/A Ammonium nitrate, even in aqueous solution 0% 15% Abiquim Pigments and preparations based on these pigments 12.60% 20% Abiquim Linear alkylbenzene sulfonic acids and their salts 12.60% 23% Abiquim Organic surface-active agents, non-ionic 12.60% 23% Abiquim Alkylbenzene mixtures 10.80% 20% Abiquim Stearic acid (industrial monocarboxylic fatty acid) 5.40% 35% Abiquim Stearic alcohol (industrial fatty alcohol) 12.60% 20% Abiquim Sodium methylate in methanol 12.60% 20% Abiquim Other ethylene polymers, in primary forms 12.60% 20% Abiquim Filled polypropylene, in primary form 12.60% 20% Abiquim Other polystyrenes in primary forms 12.60% 20% Abiquim Other polystyrenes in primary forms 12.60% 20% Unigel Holdings Inc. Polyvinyl chloride, unmixed with other substances, obtained by emulsion process 12.60% 20% Abiquim Polymethyl methacrylate, in primary form 12.60% 20% Abiquim Polymethyl methacrylate, in primary form 12.60% 20% Unigel Holdings Inc. Other polyether polyols, in primary forms 12.60% 20% Abiquim Other polyesters in liquids and pastes 12.60% 20% Abiquim Other polyurethanes in liquids and pastes 12.60% 20% Abiquim Carboxymethyl cellulose with content >=75%, in primary forms 12.60% 20% Abiquim Carboxymethyl cellulose with content >=75%, in primary forms 12.60% 20% Denver Specialty Chemicals Styrene-butadiene rubber (SBR), food grade according to the Food Chemical Codex, in primary forms 10.80% 22% Abiquim Acrylonitrile-butadiene rubber in sheets, plates, etc. 10.80% 35% Abiquim Latex of other synthetic or artificial rubbers 10.80% 35% Abiquim  

19-Sep-2024

SINGAPORE (ICIS)–Energy giant Saudi Aramco has signed new agreements to advance separate expansion plans with Chinese petrochemical producers Rongsheng and Hengli. Signing conducted during China Premier Li’s state visit to Saudi Arabia Deals with the Chinese firms part of Aramco's downstream expansion Aramco moves closer to acquire 10% of Hengli Petrochemical Chinese Premier Li Qiang and Saudi Crown Prince Mohammed Bin Salman on 11 September discussed cooperation in energy, investment, and trade, according to state news agency Saudi Press Agency (SPA). In a separate meeting with GCC secretary general Jasem Mohamed Albudaiwi in Riyadh, Li called on China and Gulf Cooperation Countries (GCC) countries to align their development strategies and “speed up free trade agreement negotiations”, according to Chinese state media Xinhua. Li is in the Middle East on 10-13 September for state visits to Saudi Arabia and the UAE, both members of GCC. The four other members of GCC are Bahrain, Kuwait, Oman and Qatar. PLANS WITH RONGSHENG The new agreements follow a previously signed framework agreement with Rongsheng Petrochemical for a potential joint-venture expansion of Saudi Aramco Jubail Refinery Company (SASREF) facilities. SASREF operates a 305,000 barrel/day refinery complex in Al-Jubail, Saudi Arabia with downstream aromatics units that can produce 260,000 tonnes/year of toluene and 275,000 tonnes/year of benzene, according to the ICIS Supply and Demand Database. Aramco now owns 10% of Rongsheng Petrochemical, bought for $3.4 billion, with further plans between the two companies to take stakes in each other’s subsidiaries. Rongsheng Petrochemical manufactures and distributes a range of petrochemical and chemical fiber products, including purified terephthalic acid (PTA), polyester yarns, polyester filaments, and polyethylene terephthalate (PET). The Saudi oil giant intends to acquire 50% of Ningbo Zhongjin Petrochemical (ZJPC), which is fully owned by Rongsheng, with plans to upgrade existing assets and jointly develop a new materials project in Zhoushan. The proposed Chinese yuan (CNY) 67.5 billion Zhoushan new materials project would produce polyethylene (PE), propylene oxide (PO), styrene, ethylene vinyl acetate (EVA), polyolefin elastomer and bisphenol A (BPA). Rongsheng, in turn, would acquire a 50% stake in Aramco’s SASREF, which operates a refinery in Jubail. POTENTIAL DEALS WITH HENGLI With Hengli, talks have advanced relating to Aramco’s potential acquisition of a 10% stake in the Chinese group’s petrochemical arm, subject to due diligence and required regulatory clearances.’ The two companies had signed a memorandum of understanding (MoU) on the proposed transaction in in April 2024. Hengli Group operates across the entire production chain of oil refining, petrochemicals, polyester film, and textiles. It is one of the biggest PTA producers in China. "China is an important country in our global downstream growth strategy," Aramco downstream president Mohammed Al Qahtani said. "These agreements reflect our collective intention to elevate our relationships in vital sectors to advance our downstream objectives." Aramco is targeting a fourfold increase in its crude oil-to-chemicals conversion capacity to four million barrels/day by 2030. Focus article by Nurluqman Suratman Thumbnail image: Chinese Premier Li Qiang meets with Saudi Crown Prince and Prime Minister Mohammed bin Salman Al Saud, and co-chairs the Fourth Meeting of the High-Level Chinese-Saudi Joint Committee with him at Riyadh's al-Yamamah Palace in Saudi Arabia on 11 September 2024.

12-Sep-2024

MUMBAI (ICIS)–Indian Oil Corp (IOC) plans to beef up its petrochemical production capacity to 14m tonnes/year by 2030 which will increase the state-owned company’s petrochemical intensity index (PII) to 15%, nearly triple its current level, company chair SM Vaidya said. Total petrochemical investments to reach Rs1.2 trillion Domestic industry projected to grow at 8-10% over the next few years Local demand estimated to hit $1 trillion by 2040 Petrochemical projects worth Indian rupees (Rs) 300 billion ($3.6 billion) are under various stages of implementation, while feasibility studies are ongoing on projects worth Rs900 billion, based on IOC’s annual report for the fiscal year ending March 2024. The company’s current petrochemical production capacity stands at 4.28 million tonnes/year, based on its annual report for the fiscal year ending March 2024. IOC’s PII refers to the percentage of crude oil that is directly converted into chemicals. “We are integrating petrochemicals into our refining operations," IOC chairman SM Vaidya said at the company’s annual general meeting on 9 August. "This oil-to-chemical approach will enrich our value chain, meet rising petrochemical demand, reduce import reliance, and insulate the bottom line from the impacts of oil price fluctuations," he said. By 2026, its refining capacity will have increased by more than 25% from the current 70.3 million tonnes/year to 87.9 million tonnes/year, Vaidya said at  IOC’s annual general meeting on 9 August. By the end of the decade, IOC expects its refining capacity to be 107.4 million tonnes/year, according to the annual report released on 18 July. “In 2023-24, we successfully commissioned the first phase of naphtha cracker expansion and paraxylene-purified terephthalic acid (PX-PTA) revamp project in Panipat and an ethylene glycol plant at Paradip. These have propelled our PII to 6.1%,” Vaidya said. In November 2023, IOC increased the capacity at the naphtha cracker at its Panipat refinery complex from 857,000 tonnes/year to 947,000 tonnes/year. Following the PX-PTA revamp at its Panipat refinery, IOC has increased its PX production to 460,000 tonnes/year and PTA output to 700,000 tonnes/year, as per the company website. In March 2024, the company inaugurated its 357,000 tonne/year monoethylene glycol (MEG) project at its Paradip refinery complex. PETROCHEMICAL PROJECT PIPELINE Indian Oil plans to commission a 150,000 tonne/year butyl acrylate plant at its Gujarat refinery in the current financial year 2024-25. One of the company’s ambitious petrochemical projects include the mega complex at Paradip in eastern Odisha state, Vaidya said, noting that the Rs610 billion project is IOC’s “largest ever investment at a single location”. The petrochemical complex will include a world-scale 1.5 milion tonne/year naphtha cracker unit along with downstream process units for producing polypropylene (PP), high density polyethylene (HDPE), linear low-density polyethylene (LLDPE) and polyvinyl chloride (PVC). The Paradip petrochemical project is currently in implementation stage and the company expects to commission it by August 2029, IOC said in its annual report released on 18 July. As part of its future expansions, IOC expects to begin operations at the 200,000 tonne/year PP plant at its Barauni refinery and 500,000 tonne/year PP line at its Gujarat refinery before end-March 2026, based on the company’s annual report. IOC has also enhanced its lube oil base stocks (LOBS) capacity at its Haldia complex and is setting up new plants at its Gujarat and Panipat refineries, Vaidya said, adding, “we aim to increase the capacity from 730,000 tonnes/year to 1.5 million tonnes/year”. The company expects to commission the 60,000 tonnes/year polybutadiene rubber (PBR) plant at its Panipat refinery by March 2025 as per the annual report. These planned expansions by IOC will help meet the rising petrochemical demand in the country, IOC stated in its latest annual report. The domestic petrochemical industry is "poised for substantial growth, driven by India’s sturdy macro fundamentals, population expansion and presently low per capita polymer consumption," it said. India's overall petrochemical demand is projected to nearly triple by 2040, with the industry's value expected to reach the $1 trillion mark, said Indian minister for petroleum and natural gas Hardeep Singh Pur in a presentation at the Asia Petrochemical Industry Conference (APIC) in May 2023. Focus article by Priya Jestin ($1 = Rs83.91) Thumbnail image: An Indian Oil petrol pump in Kolkata, 17 January 2022. (By Indranil Aditya/NurPhoto/Shutterstock)

14-Aug-2024