Manage risk with trusted market intelligence

Discover the factors influencing acrylonitrile markets

propane-based production technology may offer significant cost savings but in the meantime, supply fluctuations and price volatility for propylene and ammonia impact the acrylonitrile market globally. Without accurate analytics and comprehensive forecasting, risk increases.

The automotive sector is the key downstream demand market for acrylonitrile (ACN) globally. Another key sector that consumes ACN is acrylic fibre, which is used in the textiles industry. ICIS tracks and publishes monthly sales and production data for automotive markets in China, India, Europe and the USA. We pay particular attention to China and the US, as the world’s two largest automotive market. Its automotive sales and production are regularly reported in our associated acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-butadiene-rubber (NBR) reports.

Learn about our solutions for acrylonitrile

Pricing, news and analysis

Maximise profitability in uncertain markets with ICIS’ full range of solutions for acrylonitrile, including current and historic pricing, forecasts, supply and demand data, news and analysis.

Data solutions

Learn about Insight, Hindsight and Foresight, our dedicated commodity solutions accessible through our subscriber platform, ICIS ClarityTM or Data as a Service channels.

Acrylonitrile news

Latin America stories: weekly summary

SAO PAULO (ICIS)–Here are some of the stories from ICIS Latin America for the week ended on 24 May. NEWS Brazil’s Triunfo petchems restart odd one out as wider industry still disrupted – consultant Most of Rio Grande do Sul’s industrial plants remain shut or operating at very low rates as the Brazilian state reels from the floods, with the restart at the Triunfo petrochemicals hub an exception rather than the norm, a chemicals consultant at MaxiQuim said to ICIS. Mexico’s Orbia/Vestolit's Altamira plant ceases operations due to water scarcity Orbia/Vestolit ceased operations at its Altamira, Tampico facilities in Mexico on 21 May due to water scarcity. The company operates there a polyvinyl chloride (PVC) facility with a production capacity of 690,000 tonnes/year. The company estimates it could resume activity on 19 June. SABIC declares force majeure at Tampico Mexico ABS plant SABIC Innovative Plastics Mexico (SABIC) declared force majeure at its Tampico, Mexico acrylonitrile butadiene styrene (ABS) plant on 23 May. The products affected include CYCOLAC ABS.  This facility has a capacity of 30,000 tonnes. Mexico’s Q1 GDP grows 0.3%, economic activity remains healthy in MarchMexico’s GDP rose by 0.3% in Q1, an acceleration from Q4’s 0.1% quarterly growth, the country’s statistic office Inegi said on Thursday. Brazil’s antitrust authority paves way for Petrobras to shed refinery sales Brazilian state-owned energy major Petrobras has been allowed by the country’s antitrust authority CADE to backtrack on planned refinery sales. Argentina’s manufacturing down nearly 20% in March Argentina’s petrochemicals-intensive manufacturing output fell in March by 19.6% year on year, the country’s statistics office, Indec, said this week. Brazil’s Unigel creditors mull fertilizers divestment The debt restructuring agreement at Unigel, under which the Brazilian chemicals producer’s creditors are to take a 50% equity stake, could result in a divestment of the company's beleaguered fertilizers division. Brazil’s Unigel to give creditors 50% equity stake in debt restructuring Unigel has obtained the support of enough creditors for a debt restructuring plan although it comes at a price as they will be getting a 50% equity stake in the Brazilian chemical and fertilizer producer. Brazil's Braskem restart at Triunfo to kick off petchem hub normalization Braskem has restarted operations at its Triunfo facility in the flood-hit state of Rio Grande do Sul, which will allow other players in the petrochemicals hub to start up their plants as many depend on input from the Brazilian polymers major to operate. INEOS Styrolution declares force majeure at Altamira Mexico facility INEOS Styrolution declared force majeure at its facility in Altamira, Mexico, on 20 May. The products affected include Teluran ABS, Novodur High Heat ABS and Luran ASA. This facility has a capacity of 113,000 tonnes. Chile’s Q1 GDP up 2.3% on strong consumption, manufacturing up 1.1% The Chilean economy started 2024 on a strong footing with GDP growth in the first quarter at 2.3%, year on year, the country’s central bank said on Monday. Volkswagen, Stellantis idle car plants in Brazil, Argentina after floods Volkswagen (VW) idled its three plants in the Brazilian state of Sao Paulo on Monday, as suppliers in the floods-hit state of Rio Grande do Sul are unable to produce any automotive parts, a spokesperson for the German automotive major told ICIS. PRICING LatAm PP international prices stable to up on higher Asian freights International polypropylene (PP) prices were assessed as steady to higher across Latin American countries due to the surge in freight rates from Asia to the region. LatAm PE domestic, international prices steady on sufficient supply, stable demand Domestic and international polyethylene (PE) prices were assessed unchanged this week across Latin American countries on the back of sufficient supply and stable demand.


PODCAST: Asia propylene derivative demand still slow amid uncertainty

SINGAPORE (ICIS)–Asian oxo-alcohols buyers maintained a wait and watch approach, amid the possibility of added plant capacities in China weighing on market sentiment. The acrylonitrile (ACN) market continues to see limited spot demand in the northeast Asia market. Even as downstream acrylonitrile-butadiene-styrene (ABS) has seen higher production rates recently, ACN producers were unlikely to increase operating rates. For the acrylates downstream, butyl-A market in Asia continues to take direction from Chinese domestic prices. With India's Bureau of Indian Standards (BIS) requirements preventing Chinese origin imports, cargoes from China were flowing into SE Asia and NE Asia. In this podcast, ICIS editors Julia Tan and Corey Chew discuss trends in the Asia propylene and derivatives markets. Visit ICIS during APIC ’24 on 30-31 May at Booth 13 in the Grand Ballroom Foyer in the Grand InterContinental Seoul Parnas. Book a meeting with ICIS here.


Besieged by imports, Brazil’s chemicals put hopes on hefty import tariffs hike

SAO PAULO (ICIS)–Brazilian chemicals producers are lobbying hard for an increase in import tariffs for key polymers and petrochemicals from 12.6% to 20%, and higher in cases, hoping the hike could slow down the influx of cheap imports, which have put them against the wall. For some products, Brazil’s chemicals trade group Abiquim, which represents producers, has made official requests for the import tariffs to go up to a hefty 35%, from 9% in some cases. On Tuesday, Abiquim said several of its member companies “are already talking about hibernating plants” due to unprofitable economics. It did so after it published another set of somber statistics for the first quarter, when imports continued entering Brazil em masse. Brazil’s government Chamber of Foreign Commerce (Camex) is concluding on Tuesday a public consultation about this, with its decision expected in coming weeks. Abiquim has been busy with the public consultation: it has made as many as 66 proposals for import tariffs to be hiked for several petrochemicals and fertilizers, including widely used polymers such polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), or expandable PS (EPS), to mention just a few. Other chemicals trade groups, as well as companies, have also filed requests for import tariffs to be increased. In total, 110 import tariffs. HARD TO FIGHT OFFBrazil has always depended on imports to cover its internal chemicals demand, but the extraordinary low prices coming from competitors abroad has made Brazil’s chemicals plant to run with operating rates of 65% or lower. More and more, the country’s chemicals facilities are becoming white elephants which are far from their potential, as customers find in imported product more competitive pricing. Considering this dire situation and taking into account that the current government in Brasilia led by Luiz Inacio Lula da Silva may be more receptive to their demands, Abiquim has put a good fight in publica and private for measure which could shore up chemical producers’ competitiveness. This could come after the government already hiked import tariffs on several products in 2023 and re-introduced a tax break, called REIQ, for some chemicals which had been withdrawn by the previous Administration. While Brazil’s chemicals production competitiveness is mostly affected by higher input costs, with natural gas costs on average five times higher than in the US, the industry is hopeful a helping hand from the government in the form of higher import tariffs could slow down the flow of imports into Brazil. As a ‘price taker region’ given its dependence on imports, Latin American domestic producers have taken a hit in the past two years. In Brazil, polymers major Braskem is Abiquim’s commanding voice. Abiquim, obviously, has always been very outspoken – even apocalyptic – about the fate of its members as they try to compete with overseas countries, namely China who has been sending abroad product at below cost of production. The priorities in China’s dictatorial system are not related to the balance of markets, but to keep employment levels stable so its citizens find fewer excuses to protest against the regime which keeps them oppressed. Capitalist market dynamics are for the rest of the world to balance; in China’s dictatorial, controlled-economy regime the priority is to make people feel the regime’s legitimacy can come from never-ending economic growth. The results of such a policy for the rest of the world – not just in chemicals but in all industrial goods – is becoming clear: unprofitable industries which cannot really compete with heavily subsidized Chinese players. The results of such a policy in China are yet to be seen, but subsiding at all costs any industry which creates employment may have debt-related lasting consequences: as they mantra goes, “there is no such thing as a free lunch.” Abiquim’s executive president urged Lula’s cabinet to look north, to the US, where the government has imposed hefty tariffs on almost all China-produced industrial goods or raw materials for manufacturing production. “[The hikes in import tariffs] have improved the US’ scenario: despite the aggressive advance in exports by Asian countries, the drop in US [chemicals] production in 2023 was of 1%, while in Brazil the index for production fell nearly by 10%,” said Andre Passos. “The country adopted an increase in import taxes of over 30% to defend its market from unfair competition. The taxation for some inputs, such as phenol, resins and adipic [acid], for example, exceeds three digits. “Here, we are suggesting an increase in rates to 20% in most claims … We need to have this breathing space for the industry to recover,” he concluded. As such, the figures for the first quarter showed no sign of imports into Brazil slowing down. The country posted a trade deficit $9.9 billion during the January-March period; the 12-month accumulated (April 2023 to March 2024) deficit stood at $44.7 billion. A record high of 61.2 million tonnes of chemicals products entered Brazil in Q1; in turn, the country’s industry exported 14.6 million tonnes. Abiquim proposals for higher import tariffs Product Current import tariff Proposed tariff Expandable polystyrene, unfilled, in primary form 12.6% 20% Other polystyrenes in primary forms 12.6% 20% Carboxymethylcellulose with content > =75%, in primary forms 12.6% 20% Other polyurethanes in liquids and pastes 12.6% 20% Phthalic anhydride 10.8% 20%  Sodium hydrogen carbonate (bicarbonate) 9% 35% Copolymers of ethylene and alpha-olefin, with a density of less than 0.94 12.6% 20% Other orthophthalic acid esters 11% 20% Other styrene polymers, in primary forms 12.6% 20% Other silicon dioxides 0% 18% Other polyesters in liquids and pastes  12.6% 20% Commercial ammonium carbonates and other ammonium carbonates 9% 18% Other unsaturated polyethers, in primary forms 12.6% 20% Polyethylene terephthalate, with a viscosity index of 78 ml/g or more 12.6% 20% Phosphoric acid with an iron content of less than 750 ppm 9% 18% Dinonyl or didecyl orthophthalates 11% 20% Poly(vinyl chloride), not mixed with other substances, obtained by suspension process 12.6% 20% Poly(vinyl chloride), not mixed with other substances, obtained by emulsion process 12.6% 20% Methyl polymethacrylate, in primary form  12.6% 20% White mineral oils (vaseline or paraffin oils) 4% 35% Other polyetherpolyols, in primary forms 12.6% 20% Other unfilled epoxy resins in primary forms 12.6% 20% Silicon dioxide obtained by chemical precipitation 9% 18% Acrylonitrile-butadiene rubber in plates, sheets, etc 11% 35% Other organic anionic surface agents, whether or not put up for retail sale, not classified under previous codes 12.6% 23% Phenol (hydroxybenzene) and its salts 7% 20% Fumaric acid, its salts and esters 10 ,8% 20% Plasticizers and plastics 10 ,8% 20% Maleic anhydride 10 ,8% 20% Adipic acid salts and esters 10 ,8% 20% Propylene copolymers, in primary forms 12.6% 20% Adipic acid 9% 20% Unfilled polypropylene, in primary form 12.6% 20% Filled polypropylene, in primary form 12.6% 20% Methacrylic acid methyl esters 10 ,8% 20% Other ethylene polymers, in primary forms 12.6% 20% Acrylic acid 2-ethylhexyl esters 0% 20% 2-Ethylexanoic acid (2-ethylexoic acid) 10. 8% 20% Other copolymers of ethylene and vinyl acetate, in primary forms 12.6% 20% Other unfilled polyethylenes, density >= 0.94, in primary forms 12.6% 20% Polyethylene with a density of less than 0.94, unfilled 12.6% 20% Other saturated acyclic monoalcohol acetates, c atom <= 8 10. 8% 20% Polyethylene with a density of less than 0.94, with filler 12.6% 20% Triacetin 10. 8% 20% Sodium methylate in methanol 12.6% 20% Stearic alcohol (industrial fatty alcohol) 12.6% 20% N-butyl acetate                              11% 20% Stearic acid (industrial monocarboxylic fatty acid) 5% 35% Alkylbenzene mixtures 11% 20% Organic, non-ionic surface agents 12.6% 23% Ammonium nitrate, whether or not in aqueous solution 0.0% 15% Monoethanolamine and its salts 12.6% 20% Isobutyl alcohol (2-methyl-1-propanol) 10.8% 20% Butan-1-ol (n-butyl alcohol) 10.8% 20% Styrene-butadiene rubber (SBR), food grade as established by the Food Chemical Codex, in primary forms 10.8% 22% Styrene                                9% 18% Hexamethylenediamine and its salts 10.8% 20% Latex from other synthetic or artificial rubbers 10.8% 35% Propylene glycol (propane-1, 2-diol) 10.8% 20% Preparations 12.6% 20% Linear alkylbenzene sulfonic acids and their salts 12.6% 23% 4,4'-Isopropylidenediphenol (bisphenol A, diphenylolpropane) and its salts 10.8% 20% Dipropylene glycol 12.6% 20% Butanone (methyl ethyl ketone) 10.8% 20% Ethyl acetate                                 10.8% 20% Methyl-, ethyl- and propylcellulose, hydroxylated 0.0% 20% Front page picture: Chemical production facilities outside Sao Paulo  Source: Union of Chemical and Petrochemical industries in the state of Sao Paulo (Sinproquim) Focus article by Jonathan Lopez Additional information by Thais Matsuda and Bruno Menini


India’s Bhansali Engineering Polymers to nearly triple ABS capacity

MUMBAI (ICIS)–India’s Bhansali Engineering Polymers Ltd (BEPL) plans to nearly triple its acrylonitrile butadiene styrene (ABS) capacity at Abu Road in the northwestern Rajasthan state to 200,000 tonnes/year by March 2026. The plant’s current capacity is 70,000 tonnes/year. The company has determined that a bigger expansion than initially planned is possible after awarding work on the expansion to Japan’s Toyo Engineering, it said in a filing to the Bombay Stock Exchange (BSE) on 20 April. In January 2024, BSEL had proposed a capacity expansion to 145,000 tonnes/year. “After [a] detailed analysis [by Toyo Engineering] it was concluded that overall ABS capacity of 200,000 tonnes/year can be achieved and will be a better option compared to the earlier proposal,” BEPL said. The expansion project will be funded through internal accruals, it said, adding that cost of the expansion project will be finalised by June.


India starts antidumping probe on acetonitrile from three origins

MUMBAI (ICIS)–India has initiated an investigation into dumping of acetonitrile from China, Taiwan and Russia. The government was acting on a complaint filed by domestic producer Alkyl Amines Chemical Ltd, India's Directorate General of Trade Remedies (DGTR) said in a notification of the probe dated 26 March. Other local producers Balaji Amines Ltd and Jindal Specialty Chemicals have also supported the ADD application. The period under investigation will cover the 12 months from 1 October 2022 to 30 September 2023, while the injury examination period will cover three financial years – from April 2020 to March 2023. Alkyl Amines has claimed that “because of the dumped imports from the subject countries, the production and capacity utilization of the domestic industry are significantly below its installed capacity”. Acetonitrile is a byproduct of the acrylonitrile (ACN) production process. It is used to make pharmaceuticals, perfumes, rubber products, pesticides, batteries, among others.


AFPM '24: INSIGHT: Biden ending term with regulatory bang for US chems

HOUSTON (ICIS)–The administration of US President Joe Biden is proposing a wave of regulations before its term ends in 2025, many of which will increase costs for chemical companies in the US and persist even if the nation elects a new president later this year. The prospect of such consequential policies comes as delegates head into this year's International Petrochemical Conference (IPC), hosted by the American Fuel & Petrochemical Manufacturers (AFPM). Changes to the Clean Waters Act, the Risk Management Program (RMP) and the Hazard Communication Standard are among the most consequential policies being considered by US regulators. Electric vehicles (EVs) could receive more support from federal and state governments. This would increase demand for plastics used in EVs while discouraging refiners from making further investments, which could limit US production of benzene, toluene and mixed xylenes (MX). The failure of Congress to re-authorize the nation's chemical site security program could spell its end. REGULATORY PUSH DURING ELECTION YEARSuch a regulatory push by the Biden administration was flagged last year by the Alliance for Chemical Distribution (ACD), the new name for the National Association of Chemical Distributors (NACD). The group was not crying wolf. The next nine months could rank among the worst for the chemical industry in terms of regulatory change and potential issues, said Eric Byer, president of the ACD. "Whatever it's going to be, it will come done fairly aggressively." The Biden administration has proposed several consequential policies. For the Clean Water Act, the Environmental Protection Agency (EPA) is developing new requirements, which will require chemical producers and other companies to develop plans to address the worst possible discharge from their plants. The ACD warned that the new requirement would raise compliance costs while doing little to reduce the already small number of discharges by plants. The final rule is scheduled to be published in April 2024. For the RMP, changes could require chemical companies to share information that has been off limits since the 9/11 terrorist attacks, according to the American Chemistry Council (ACC). The concern is that the information will fall into the wrong hands, while significantly increasing costs to comply with the new requirements, according to the ACD. The Occupational Safety and Health Administration (OSHA) is introducing changes to its Hazard Communication Standard that could create more burdens for companies. The ACD warned that some of the changes will increase costs without providing a commensurate improvement in safety. The EPA has started the multiyear process that, under the regulator's current whole-chemical approach, will lead to restrictions imposed on vinyl chloride monomer (VCM), acrylonitrile (ACN) and aniline, a chemical used to make methylene diphenyl diisocyanate (MDI). This is being done through the nation's main chemical safety program, known as the Toxic Substances Control Act (TSCA). MORE POLICIES PROPOSED FOR EVsThe Biden administration is proposing additional polices to encourage the adoption of EVs. For chemical producers, more EVs would increase demand for plastics, resins and thermal management fluids that are designed to meet the material challenges of these automobiles. At the same time, the push towards EVs could limit sales of automobiles powered by internal combustion engines (ICEs), lowering demand for gasoline and diesel. Refiners could decide to shut down and repurpose their complexes if they expect demand for their main products will stop growing or decline. That would lower production of aromatics and other refinery chemicals and refined products. The Biden administration is moving on three fronts to encourage EV sales. The EPA is expected to decide if California can adopt its Advanced Clean Car II (ACC II), which would phase out the sale of ICE-based vehicles to 2035. If the EPA grants California's request, that would trigger similar programs in several other states. The EPA's light-duty vehicle proposal would impose stricter standards on tail pipe emissions. The US Department of Transportation (DOT) is proposing stricter efficiency standards under its Corporate Average Fuel Economy (CAFE) program. The AFPM opposes these measures. It said the EPA's light-duty vehicle proposal and DOT's new CAFE standards are so demanding, it would force automobile companies to produce a lot more EVs, plug-in hybrids and fuel-cell vehicles to meet the more ambitious requirements. LAX OVERSIGHT OF SHIPPING RATES IN WAKE OF HOUTHISThe ACD raised concerns that the US is not doing enough to address the possibility that shipping rates and delays have increased beyond what could be justified by the disruptions caused by the drought in Panama and by the Houthi attacks on vessels passing through the Red Sea to the Suez Canal. The ACD accepts that costs will rise, but it expressed concerns that shipping companies could be taking advantage of the situation by charging excessive rates on routes unaffected by the disruptions. These include routes from India and China to the western coast of the US, Byer said. "Why are you jacking up the price two or threefold?" LABOR NEGOTIATIONS FOR US EAST COASTThe work contract will expire this year for dockworkers and ports along the East Coast of the US. Byer warned of a possible strike if the talks become too contentious. On the West Coast, dockworkers and ports reached an agreement on a six-year work contract. CFATS ON LIFE SUPPORTByer expressed concerns about the future of the main chemical-site security program, called the Chemical Facility Anti-Terrorism Standards (CFATS). CFATS is overseen by the Cybersecurity & Infrastructure Security Agency (CISA), which is under the Department of Homeland Security (DHS). CISA lost authority to implement CFATS on 28 July 2023, when a bill that would have re-authorized it was blocked from going to a vote in the Senate. Without CFATS, other federal and state agencies could create their own chemical-site security regulations. This process has already started in the US state of Nebraska, where State Senator Eliot Bostar introduced LB1048. Other nearby states in the plains could introduce similar bills, because they tend to follow each other's lead, Byer said. Many of these state legislatures should wrap up sessions in the next couple of months, so lawmakers still have time to propose chemical-site security bills. The ACD is most concerned about larger states creating chemical-site security programs, such as California, Illinois, New Jersey and New York. SENATE RAIL BILL REMAINS PENDINGA Senate rail safety bill has been pending for more than a year after a bipartisan group of legislators introduced it following the train derailment in East Palestine, Ohio. Congress has about 10 months to approve the bill before it lapses, Byer said. For bills in general, action during an election year could happen around the Memorial Day holiday in May, the 4 July recess, the August recess or before the end of September. After September, legislators will be focused on campaigning for the 5 November election. TEXAS BRINGS BACK TAX BREAKS FOR INDUSTRIAL PROJECTSTexas has revived a program that granted tax breaks to new chemical plants and other large industrial projects. The new program is called the Texas Jobs and Security Act, and it replaced the lapsed Chapter 313 School Value Limitation Agreement. The old program was popular with chemical companies, and their applications were among the first public disclosures of their expansion plans. The new program has already attracted applicants. Summit Next Gen is considering a plant that would convert 450 million gal/year of ethanol into 256 million gal/year of sustainable aviation fuel (SAF). Hosted by the AFPM, the IPC takes place on March 24-26. Insight article by Al Greenwood Thumbnail shows a federal building. Image by Lucky-photographer


India’s Styrenix plans ABS, PS capacity expansions in Gujarat

MUMBAI (ICIS)–India’s Styrenix Performance Materials (SPM) expects to begin operations at its expanded acrylonitrile butadiene styrene (ABS) and polystyrene (PS) capacities at Dahej and Nandesari in the western Gujarat state before 2028, a company source said on Friday. SPM plans to invest Rs6.5bn ($78m) on the expansion projects. Its ABS capacity will grow to 210,000 tonnes/year over the next four years, from 85,000 tonnes/year currently; while its PS capacity will be raised to 150,000 tonnes/year over the next three years from the current 66,000 tonnes/year, based on the plan released in October 2023. Funding the brownfield expansions will be through a mix of internal accruals and debt, SPM said. “The expansion will be done in a phased manner and capacity will be increased gradually over the next few years,” the company source said. The expansion of production capacities will help SPM meet increasing domestic demand for ABS and PS, he sai. “We expect to see robust growth in in our existing markets like automobiles, household appliances, medical devices, electronics, [among others],” the source said. SPM is formerly known as INEOS Styrolution India. It was renamed in January 2023 after INEOS Styrolution sold its entire stake in the company to Shiva Performance Material in August 2022. ($1 = Rs83)


Asia top stories – weekly summary

SINGAPORE (ICIS)–Here are the top stories from ICIS News Asia and the Middle East for the week ended 9 February 2024. India methanol gains on lower Iran volumes amid plant outagesBy Keven Zhang 09-Feb-24 14:38 SINGAPORE (ICIS)–Indian methanol spot market continued to be driven by supply outages in Iran, with a trade concluded higher than the previous week. INSIGHT: Asia benzene remains profitable supported by demand in 2024 By Jenny Yi 08-Feb-24 22:27 SINGAPORE (ICIS)–Asia benzene supply growth will moderate in 2024 compared with last year, which saw the the peak of the latest capacity expansion cycle. The downstream market still maintains rapid capacity growth, however, which exceeds the supply growth rate of benzene. Asia adipic acid struggles to keep up with cost pressure ahead of holidays By Josh Quah 08-Feb-24 13:44 SINGAPORE (ICIS)–Adipic acid (ADA) prices in Asia have been on a general upward trend since around mid-December 2023 for China-origin cargoes. INSIGHT: Asia ABS supply length will intensify amid China expansions By May Hu 08-Feb-24 10:00 SINGAPORE (ICIS)–ABS (acrylonitrile butadiene styrene) capacity growth in Asia peaked in 2023 and will be sustained in 2024 on massive new capacities coming on stream in China. China petrochemical demand may stay muted post-holiday By Yvonne Shi 07-Feb-24 15:09 SINGAPORE (ICIS)–Low market confidence has kept petrochemical restocking in China tepid before the Lunar New Year holiday, with players refraining from building up inventory given uncertain demand recovery in March. China Jan petrochemical markets gain on restocking; Feb holidays to hit demand By Yvonne Shi 06-Feb-24 14:58 SINGAPORE(ICIS)–China’s domestic petrochemical markets gained in end-January on the back firm crude prices and some restocking ahead of the Lunar New Year holiday, with demand in February likely to weaken. Asia titanium dioxide spot market may be fuelled by bullish sentiment By Joson Ng 05-Feb-24 16:56 SINGAPORE (ICIS)–The titanium dioxide (TiO2) spot market in Asia is likely to see supply factors driving the market in February. India hikes infrastructure capex for fourth year; Rs11.1tr set for 2024-25 By Priya Jestin 05-Feb-24 14:49 MUMBAI (ICIS)–India’s government has announced plans to increase its capital expenditure on infrastructure projects to rupees (Rs) 11.1trn ($134bn) in its interim budget for 2024-2025, up 11% from the previous fiscal year, boosting the funds available for the sector for the fourth consecutive year.


US Trinseo expects another net loss in Q1, may take more actions

HOUSTON (ICIS)–Trinseo expects another quarterly net loss in the first quarter after reporting one on Monday for its fourth-quarter results. The company has already shutdown some manufacturing capacity, and the company will continue to assess whether it should do more to "increase our manufacturing network flexibility", said Frank Bozich, CEO. Any such actions would allow the company to take advantage of cost differences among different regions while also improving profitability, lowering capital expenditures and optimizing working capital, Bozich said. At the same time, the moves would allow Trinseo to continue investing in higher-value products as well as sustainable ones. The following table compares the company's Q1 guidance to its Q4 and Q1 performance during 2023. Figures are in millions of dollars. Q1 '24 Q4 '23 Q1 '23 Net loss from continuing operations 77-67 265 49 Adjusted EBITDA 40-50 20 36 Source: Trinseo “The unprecedented drop in demand we saw starting in the third quarter of 2022 has persisted, and a great deal of macroeconomic uncertainty remains," Bozich said. “We are seeing stronger order loads to begin the year following the challenges we faced in the fourth quarter, and therefore, we expect significantly higher sequential profitability in the first quarter of 2024," he said. However, the first quarter should be the one with the lowest profitability because volumes are typically lower during that time of the year and because of plant turnaounds, Trinseo said. Also, the timing of newly awarded business will contribute to lower profitability. For all of 2024, Trinseo expects a similar constrained demand environment to 2023. Shares of Trinseo rose by 1.63% in afterhours trading. Q4 PERFORMANCEThe following table shows Trinseo's Q4 performance. Figures are in millions of dollars. Q4 23 Q4 22 % Change Net sales 837.5 975.2 -14.1% Cost of sales 817.2 978.4 -16.5% Gross profit 20.3 -3.2 – Net loss * 265.0 364.3 -27.3% Adjusted EBITDA 20.2 6.3 – *from continuing operations Source: Trinseo Trinseo makes styrenics and engineered materials. Thumbnail shows spoons made of acrylonitrile butadiene styrene (ABS), one of the resins made by Trinseo. Image by ICIS.


PODCAST: Asia benzene lifted by higher oil prices, pre-holiday restocking

SINGAPORE (ICIS)–Asia's benzene prices trended upwards because of crude gains as well some pre-Lunar New Year restocking. Downstream styrene (SM) producers however, struggled with higher costs and low demand from sectors such as polystyrene (PS), expandable polystyrene (EPS) and acrylonitrile-butadiene-styrene (ABS). In this chemical podcast, ICIS editors Angeline Soh and Luffy Wu discuss recent market conditions with an outlook ahead in Asia. Benzene Feb cargoes sold out from pre-LNY stocking up, US demand as plants shut from winter storm Demand for March cargoes buoyed; buyers beyond Asia worried about tightened supply with upcoming derivative additions in China Asian styrene market players struggling with high costs but low demand Regional styrene exporters eyeing long-haul opportunities to Europe


Events and training


Build your networks and grow your business at ICIS’ industry-leading events. Hear from high-profile speakers on the issues, technologies and trends driving commodity markets.


Keep up to date in today’s dynamic commodity markets with expert online and in-person training covering chemicals, fertilizers and energy markets.

Contact us

In today’s dynamic and interconnected chemicals markets, partnering with ICIS unlocks a vision of a future you can trust and achieve. We leverage our unrivalled network of chemicals industry experts to support our partners as they transact today and plan for tomorrow. Capitalise on opportunity, with a comprehensive market view based on trusted data, insight and analytics.

Get in touch to find out more.